Re: [PATCH v2 11/12] arm64: dts: qcom: sc8180x: Introduce Primus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 25.03.2023 13:24, Vinod Koul wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> Introduce support for the SC8180X reference device, aka Primus, with
> debug UART, regulators, UFS and USB support.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
Please introduce PMICs in a separate commit. On top of that,
the previous patch (in a very slim and basic version) should
have been combined with (a very slim and basic version) this
patch so that we don't introduce code that never compiles.

And the patches are missing your (as the sender) S-o-bs.

Please run them through dtbs_check and checkpatch.pl --strict,
I think it should have pointed some of that out.

Konrad
>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>  arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 326 +++++++++
>  arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 706 ++++++++++++++++++++
>  3 files changed, 1033 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-primus.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 31aa54f0428c..fdce44a7a902 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -141,6 +141,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-nvme-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
> new file mode 100644
> index 000000000000..49c146b6f37f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
> @@ -0,0 +1,326 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2021-2022, Linaro Limited
> + */
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +#include <dt-bindings/iio/qcom,spmi-vadc.h>
> +
> +/ {
> +	thermal-zones {
> +		pmc8180-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&pmc8180_temp>;
> +
> +			trips {
> +				trip0 {
> +					temperature = <95000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				trip1 {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "hot";
> +				};
> +
> +				trip2 {
> +					temperature = <145000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		pmc8180c-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&pmc8180c_temp>;
> +
> +			trips {
> +				trip0 {
> +					temperature = <95000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				trip1 {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "hot";
> +				};
> +
> +				trip2 {
> +					temperature = <145000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&spmi_bus {
> +	pmc8180_0: pmic@0 {
> +		compatible = "qcom,pm8150", "qcom,spmi-pmic";
> +		reg = <0x0 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pon: power-on@800 {
> +			compatible = "qcom,pm8916-pon";
> +			reg = <0x0800>;
> +			pwrkey {
> +				compatible = "qcom,pm8941-pwrkey";
> +				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
> +				debounce = <15625>;
> +				bias-pull-up;
> +				linux,code = <KEY_POWER>;
> +
> +				status = "disabled";
> +			};
> +		};
> +
> +		pmc8180_temp: temp-alarm@2400 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0x2400>;
> +			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
> +			io-channels = <&pmc8180_adc ADC5_DIE_TEMP>;
> +			io-channel-names = "thermal";
> +			#thermal-sensor-cells = <0>;
> +		};
> +
> +		pmc8180_adc: adc@3100 {
> +			compatible = "qcom,spmi-adc5";
> +			reg = <0x3100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#io-channel-cells = <1>;
> +			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> +			ref-gnd@0 {
> +				reg = <ADC5_REF_GND>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "ref_gnd";
> +			};
> +
> +			vref-1p25@1 {
> +				reg = <ADC5_1P25VREF>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "vref_1p25";
> +			};
> +
> +			die-temp@6 {
> +				reg = <ADC5_DIE_TEMP>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "die_temp";
> +			};
> +		};
> +
> +		pmc8180_adc_tm: adc-tm@3500 {
> +			compatible = "qcom,spmi-adc-tm5";
> +			reg = <0x3500>;
> +			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		rtc@6000 {
> +			compatible = "qcom,pm8941-rtc";
> +			reg = <0x6000>;
> +			reg-names = "rtc", "alarm";
> +			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
> +		};
> +
> +		pmc8180_gpios: gpio@c000 {
> +			compatible = "qcom,pmc8180-gpio";
> +			reg = <0xc000>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
> +	pmic@1 {
> +		compatible = "qcom,pmc8180", "qcom,spmi-pmic";
> +		reg = <0x1 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	pmic@2 {
> +		compatible = "qcom,smb2351", "qcom,spmi-pmic";
> +		reg = <0x2 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		adc@3100 {
> +			compatible = "qcom,spmi-adc-rev2";
> +			reg = <0x3100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#io-channel-cells = <1>;
> +			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> +			ref-gnd@0 {
> +				reg = <ADC5_REF_GND>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "ref_gnd";
> +			};
> +
> +			vref-1p25@1 {
> +				reg = <ADC5_1P25VREF>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "vref_1p25";
> +			};
> +
> +			vcoin@85 {
> +				reg = <0x85>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "vcoin2";
> +			};
> +		};
> +	};
> +
> +	pmic@6 {
> +		compatible = "qcom,pm8150c", "qcom,spmi-pmic";
> +		reg = <0x6 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	pmic@8 {
> +		compatible = "qcom,pm8150", "qcom,spmi-pmic";
> +		reg = <0x8 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	pmic@a {
> +		compatible = "qcom,smb2351", "qcom,spmi-pmic";
> +		reg = <0xa SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		adc@3100 {
> +			compatible = "qcom,spmi-adc-rev2";
> +			reg = <0x3100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#io-channel-cells = <1>;
> +			interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> +			ref-gnd@0 {
> +				reg = <ADC5_REF_GND>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "ref_gnd";
> +			};
> +
> +			vref-1p25@1 {
> +				reg = <ADC5_1P25VREF>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "vref_1p25";
> +			};
> +
> +			vcoin@85 {
> +				reg = <0x85>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "vcoin";
> +			};
> +		};
> +	};
> +
> +	pmic@4 {
> +		compatible = "qcom,pm8150c", "qcom,spmi-pmic";
> +		reg = <0x4 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		power-on@800 {
> +			compatible = "qcom,pm8916-pon";
> +			reg = <0x0800>;
> +
> +			status = "disabled";
> +		};
> +
> +		pmc8180c_temp: temp-alarm@2400 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0x2400>;
> +			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
> +			io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>;
> +			io-channel-names = "thermal";
> +			#thermal-sensor-cells = <0>;
> +		};
> +
> +		pmc8180c_adc: adc@3100 {
> +			compatible = "qcom,spmi-adc5";
> +			reg = <0x3100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#io-channel-cells = <1>;
> +			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> +			ref-gnd@0 {
> +				reg = <ADC5_REF_GND>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "ref_gnd";
> +			};
> +
> +			vref-1p25@1 {
> +				reg = <ADC5_1P25VREF>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "vref_1p25";
> +			};
> +
> +			die-temp@6 {
> +				reg = <ADC5_DIE_TEMP>;
> +				qcom,pre-scaling = <1 1>;
> +				label = "die_temp";
> +			};
> +		};
> +
> +		pmc8180c_adc_tm: adc-tm@3500 {
> +			compatible = "qcom,spmi-adc-tm5";
> +			reg = <0x3500>;
> +			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		pmc8180c_gpios: gpio@c000 {
> +			compatible = "qcom,pmc8180c-gpio";
> +			reg = <0xc000>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
> +	pmic@5 {
> +		compatible = "qcom,pmc8180c", "qcom,spmi-pmic";
> +		reg = <0x5 SPMI_USID>;
> +
> +		pmc8180c_lpg: lpg {
> +			compatible = "qcom,pmc8180c-lpg";
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#pwm-cells = <2>;
> +
> +			status = "disabled";
> +		};
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
> new file mode 100644
> index 000000000000..9f365fccae78
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
> @@ -0,0 +1,706 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020-2023, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sc8180x.dtsi"
> +#include "sc8180x-pmics.dtsi"
> +
> +/ {
> +	model = "Qualcomm SC8180x Primus";
> +	compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
> +
> +	aliases {
> +		serial0 = &uart12;
> +		serial1 = &uart13;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pmc8180c_lpg 4 1000000>;
> +		enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bl_pwm_default>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hall_int_active_state>;
> +
> +		lid-switch {
> +			gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
> +			linux,input-type = <EV_SW>;
> +			linux,code = <SW_LID>;
> +			wakeup-source;
> +			wakeup-event-action = <EV_ACT_DEASSERTED>;
> +		};
> +	};
> +
> +	reserved-memory {
> +		rmtfs_mem: rmtfs-region@85500000 {
> +			compatible = "qcom,rmtfs-mem";
> +			reg = <0x0 0x85500000 0x0 0x200000>;
> +			no-map;
> +
> +			qcom,client-id = <1>;
> +			qcom,vmid = <15>;
> +		};
> +
> +		wlan_mem: wlan-region@8bc00000 {
> +			reg = <0x0 0x8bc00000 0x0 0x180000>;
> +			no-map;
> +		};
> +
> +		adsp_mem: adsp-region@96e00000 {
> +			reg = <0x0 0x96e00000 0x0 0x1c00000>;
> +			no-map;
> +		};
> +
> +		mpss_mem: mpss-region@8d800000 {
> +			reg = <0x0 0x8d800000 0x0 0x9600000>;
> +			no-map;
> +		};
> +
> +		gpu_mem: gpu-region@98a00000 {
> +			reg = <0x0 0x98a00000 0x0 0x2000>;
> +			no-map;
> +		};
> +
> +		reserved-region@9a500000 {
> +			reg = <0x0 0x9a500000 0x0 0x600000>;
> +			no-map;
> +		};
> +	};
> +
> +	vreg_nvme_0p9: nvme-0p9-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vreg_nvme_0p9";
> +
> +		regulator-min-microvolt = <900000>;
> +		regulator-max-microvolt = <900000>;
> +
> +		regulator-always-on;
> +	};
> +
> +	vreg_nvme_3p3: nvme-3p3-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vreg_nvme_3p3";
> +
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpio = <&pmc8180c_gpios 11 0>;
> +		enable-active-high;
> +
> +		regulator-always-on;
> +	};
> +
> +	vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_kb_tp_3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +
> +		gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		regulator-always-on;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&kb_tp_3v3_en_active_state>;
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +	};
> +
> +	vreg_s4a_1p8: pm8150-s4 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vreg_s4a_1p8";
> +
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +
> +		regulator-always-on;
> +		regulator-boot-on;
> +
> +		vin-supply = <&vph_pwr>;
> +	};
> +};
> +
> +&apps_rsc {
> +	pmc8180-a-rpmh-regulators {
> +		compatible = "qcom,pmc8180-rpmh-regulators";
> +		qcom,pmic-id = "a";
> +
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
> +
> +		vreg_s5a_2p0: smps5 {
> +			regulator-min-microvolt = <2040000>;
> +			regulator-max-microvolt = <2100000>;
> +		};
> +
> +		vreg_l7a_1p8: ldo7 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l9a_1p3: ldo9 {
> +			regulator-min-microvolt = <1296000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l12a_1p8: ldo12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	pmc8180c-rpmh-regulators {
> +		compatible = "qcom,pmc8180c-rpmh-regulators";
> +		qcom,pmic-id = "c";
> +
> +		vdd-s6-supply = <&vph_pwr>;
> +		vdd-s8-supply = <&vph_pwr>;
> +		vdd-l2-l3-supply = <&vreg_s6c_1p35>;
> +		vdd-bob-supply = <&vph_pwr>;
> +
> +		vreg_s6c_1p35: smps6 {
> +			regulator-min-microvolt = <1350000>;
> +			regulator-max-microvolt = <1372000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s8c_1p8: smps8 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-always-on;
> +		};
> +
> +		vreg_l3c_1p2: ldo3 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l4c_3p3: ldo4 {
> +			regulator-min-microvolt = <3008000>;
> +			regulator-max-microvolt = <3008000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l10c_3p3: ldo10 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3312000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l11c_3p3: ldo11 {
> +			regulator-min-microvolt = <3296000>;
> +			regulator-max-microvolt = <3304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_bob: bob {
> +			regulator-min-microvolt = <3296000>;
> +			regulator-max-microvolt = <3350000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	pmc8180-e-rpmh-regulators {
> +		compatible = "qcom,pmc8180-rpmh-regulators";
> +		qcom,pmic-id = "e";
> +
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-l2-l10-supply = <&vreg_bob>;
> +		vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
> +		vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
> +		vdd-l13-l16-l17-supply = <&vreg_bob>;
> +
> +		vreg_s4e_0p98: smps4 {
> +			regulator-min-microvolt = <992000>;
> +			regulator-max-microvolt = <992000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_s5e_2p05: smps5 {
> +			regulator-min-microvolt = <2040000>;
> +			regulator-max-microvolt = <2040000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l1e_0p75: ldo1 {
> +			regulator-min-microvolt = <752000>;
> +			regulator-max-microvolt = <752000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5e_0p88: ldo5 {
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7e_1p8: ldo7 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l10e_2p9: ldo10 {
> +			regulator-min-microvolt = <2904000>;
> +			regulator-max-microvolt = <2904000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l12e: ldo12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l16e_3p0: ldo16 {
> +			regulator-min-microvolt = <3072000>;
> +			regulator-max-microvolt = <3072000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +};
> +
> +&dispcc {
> +	status = "okay";
> +};
> +
> +&gpu {
> +	status = "okay";
> +
> +	zap-shader {
> +		memory-region = <&gpu_mem>;
> +		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ts_i2c_active_state>;
> +
> +	status = "okay";
> +
> +	touchscreen@10 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x10>;
> +		hid-descr-addr = <0x1>;
> +
> +		vdd-supply = <&vreg_l4c_3p3>;
> +		vddl-supply = <&vreg_l12e>;
> +
> +		post-power-on-delay-ms = <20>;
> +
> +		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts_active_state>;
> +	};
> +};
> +
> +&i2c7 {
> +	clock-frequency = <100000>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&aux_i2c_active_state>;
> +
> +	status = "okay";
> +
> +	touchpad@15 {
> +		compatible = "hid-over-i2c";
> +		reg = <0x15>;
> +		hid-descr-addr = <0x1>;
> +
> +		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tp_int_active_state>;
> +
> +		vdd-supply = <&vdd_kb_tp_3v3>;
> +	};
> +
> +	keyboard@3a {
> +		compatible = "hid-over-i2c";
> +		reg = <0x3a>;
> +		hid-descr-addr = <0x1>;
> +		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&kb_int_active_state>;
> +
> +		vdd-supply = <&vdd_kb_tp_3v3>;
> +	};
> +};
> +
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_edp {
> +	data-lanes = <0 1 2 3>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&edp_hpd_active>;
> +
> +	status = "okay";
> +
> +	aux-bus {
> +		panel {
> +			compatible = "edp-panel";
> +
> +			backlight = <&backlight>;
> +
> +			ports {
> +				port {
> +					auo_b133han05_in: endpoint {
> +						remote-endpoint = <&mdss_edp_out>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss_edp_out: endpoint {
> +				remote-endpoint = <&auo_b133han05_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&pcie1 {
> +	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
> +	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie2_default_state>;
> +
> +	status = "okay";
> +};
> +
> +&pcie1_phy {
> +	vdda-phy-supply = <&vreg_l5e_0p88>;
> +	vdda-pll-supply = <&vreg_l3c_1p2>;
> +
> +	status = "okay";
> +};
> +
> +&pmc8180c_lpg {
> +	status = "okay";
> +};
> +
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&qupv3_id_1 {
> +	status = "okay";
> +};
> +
> +&qupv3_id_2 {
> +	status = "okay";
> +};
> +
> +&remoteproc_adsp {
> +	memory-region = <&adsp_mem>;
> +	firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
> +
> +	status = "okay";
> +};
> +
> +&remoteproc_mpss {
> +	memory-region = <&mpss_mem>;
> +	firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
> +
> +	status = "okay";
> +};
> +
> +&uart12 {
> +	compatible = "qcom,geni-debug-uart";
> +	status = "okay";
> +};
> +
> +&uart13 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart13_state>;
> +
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "qcom,wcn3998-bt";
> +
> +		vddio-supply = <&vreg_s4a_1p8>;
> +		vddxo-supply = <&vreg_l7a_1p8>;
> +		vddrf-supply = <&vreg_l9a_1p3>;
> +		vddch0-supply = <&vreg_l11c_3p3>;
> +		max-speed = <3200000>;
> +	};
> +};
> +
> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l10e_2p9>;
> +	vcc-max-microamp = <155000>;
> +
> +	vccq2-supply = <&vreg_l7e_1p8>;
> +	vccq2-max-microamp = <425000>;
> +
> +	status = "okay";
> +};
> +
> +&ufs_mem_phy {
> +	vdda-phy-supply = <&vreg_l5e_0p88>;
> +	vdda-pll-supply = <&vreg_l3c_1p2>;
> +
> +	status = "okay";
> +};
> +
> +&usb_prim_hsphy {
> +	vdda-pll-supply = <&vreg_l5e_0p88>;
> +	vdda18-supply = <&vreg_l12a_1p8>;
> +	vdda33-supply = <&vreg_l16e_3p0>;
> +
> +	status = "okay";
> +};
> +
> +&usb_prim_qmpphy {
> +	vdda-phy-supply = <&vreg_l3c_1p2>;
> +	vdda-pll-supply = <&vreg_l5e_0p88>;
> +
> +	status = "okay";
> +};
> +
> +&usb_prim {
> +	status = "okay";
> +};
> +
> +&usb_prim_dwc3 {
> +	dr_mode = "host";
> +};
> +
> +&usb_sec_hsphy {
> +	vdda-pll-supply = <&vreg_l5e_0p88>;
> +	vdda18-supply = <&vreg_l12a_1p8>;
> +	vdda33-supply = <&vreg_l16e_3p0>;
> +
> +	status = "okay";
> +};
> +
> +&usb_sec_qmpphy {
> +	vdda-phy-supply = <&vreg_l3c_1p2>;
> +	vdda-pll-supply = <&vreg_l5e_0p88>;
> +
> +	status = "okay";
> +};
> +
> +&usb_sec {
> +	status = "okay";
> +};
> +
> +&usb_sec_dwc3 {
> +	dr_mode = "host";
> +};
> +
> +&wifi {
> +	memory-region = <&wlan_mem>;
> +
> +	vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
> +	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
> +	vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
> +	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
> +	vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
> +
> +	status = "okay";
> +};
> +
> +&xo_board_clk {
> +	clock-frequency = <38400000>;
> +};
> +
> +/* PINCTRL */
> +
> +&pmc8180c_gpios {
> +	bl_pwm_default: bl-pwm-default-state {
> +		en-pins {
> +			pins = "gpio8";
> +			function = "normal";
> +		};
> +
> +		pwm-pins {
> +			pins = "gpio10";
> +			function = "func1";
> +		};
> +	};
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
> +
> +	aux_i2c_active_state: aux-i2c-active-state {
> +		pins = "gpio98", "gpio99";
> +		function = "qup7";
> +
> +		bias-disable;
> +		drive-strength = <16>;
> +	};
> +
> +	edp_hpd_active: epd-hpd-active-state {
> +		pins = "gpio10";
> +		function = "edp_hot";
> +	};
> +
> +	hall_int_active_state: hall-int-active-state {
> +		pins = "gpio121";
> +		function = "gpio";
> +
> +		input-enable;
> +		bias-disable;
> +	};
> +
> +	kb_int_active_state: kb-int-active-state {
> +		int-n-pins {
> +			pins = "gpio37";
> +			function = "gpio";
> +
> +			bias-pull-up;
> +			intput-enable;
> +		};
> +
> +		kp-disable-pins {
> +			pins = "gpio135";
> +			function = "gpio";
> +
> +			output-high;
> +		};
> +	};
> +
> +	kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
> +		pins = "gpio4";
> +		functino = "gpio";
> +
> +		bias-disable;
> +	};
> +
> +	pcie2_default_state: pcie2-default-state {
> +		clkreq-pins {
> +			pins = "gpio176";
> +			function = "pci_e2";
> +			bias-pull-up;
> +		};
> +
> +		reset-n-pins {
> +			pins = "gpio175";
> +			function = "gpio";
> +
> +			drive-strength = <2>;
> +			output-low;
> +			bias-pull-down;
> +		};
> +
> +		wake-n-pins {
> +			pins = "gpio177";
> +			function = "gpio";
> +
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +	};
> +
> +	tp_int_active_state: tp-int-active-state {
> +		tp-int-pins {
> +			pins = "gpio24";
> +			function = "gpio";
> +
> +			bias-disable;
> +			input-enable;
> +		};
> +
> +		tp-close-n-pins {
> +			pins = "gpio116";
> +			function = "gpio";
> +
> +			bias-disable;
> +			input-enable;
> +		};
> +	};
> +
> +	ts_active_state: ts-active-state {
> +		int-n-pins {
> +			pins = "gpio122";
> +			function = "gpio";
> +
> +			input-enable;
> +			bias-disable;
> +		};
> +
> +		reset-n-pins {
> +			pins = "gpio54";
> +			function = "gpio";
> +
> +			output-high;
> +		};
> +	};
> +
> +	ts_i2c_active_state: ts-i2c-active-state {
> +		pins = "gpio114", "gpio115";
> +		function = "qup1";
> +
> +		/* External pull up */
> +		bias-disable;
> +		drive-strength = <2>;
> +	};
> +
> +	uart13_state: uart13-state {
> +		cts-pins {
> +			pins = "gpio43";
> +			function = "qup13";
> +			bias-pull-down;
> +		};
> +
> +		rts-tx-pins {
> +			pins = "gpio44", "gpio45";
> +			function = "qup13";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +
> +		rx-pins {
> +			pins = "gpio46";
> +			function = "qup13";
> +			bias-pull-up;
> +		};
> +	};
> +};



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux