Assign RPM_SMD_XO_CLK_SRC from rpmcc in place
of fixed-clock where possible.
Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index da00c2f04cda..438a70eb6152 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -2,6 +2,7 @@
/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
#include <dt-bindings/clock/qcom,gcc-msm8953.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -637,7 +638,7 @@ gcc: clock-controller@1800000 {
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- clocks = <&xo_board>,
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>,
<0>,
<0>,
@@ -801,7 +802,7 @@ dsi0_phy: phy@1a94400 {
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+ clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
@@ -868,7 +869,7 @@ dsi1_phy: phy@1a96400 {
#clock-cells = <1>;
#phy-cells = <0>;
- clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+ clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
status = "disabled";
@@ -992,7 +993,7 @@ sdhc_1: mmc@7824900 {
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
- <&xo_board>;
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
power-domains = <&rpmpd MSM8953_VDDCX>;
@@ -1052,7 +1053,7 @@ sdhc_2: mmc@7864900 {
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
power-domains = <&rpmpd MSM8953_VDDCX>;
--
2.25.1
