[PATCH v2 4/4] arm64: dts: qcom: sm8450: fix pcie1 gpios properties name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the final "s" to the pgio properties and fix the invalid "enable"
name to the correct "wake", checked against the HDK8450 schematics.

Fixes: bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index bcb51e612261..398661498920 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1908,8 +1908,8 @@ pcie1: pci@1c08000 {
 			phys = <&pcie1_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;

-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux