Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 66 +++++++++++-----------------
1 file changed, 26 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index be10b68893e8..e4ecc0804cd9 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1859,7 +1859,7 @@ pcie0: pci@1c00000 {
power-domains = <&gcc PCIE_0_GDSC>;
- phys = <&pcie0_lane>;
+ phys = <&pcie0_phy>;
phy-names = "pciephy";
perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
@@ -1873,14 +1873,20 @@ pcie0: pci@1c00000 {
pcie0_phy: phy@1c06000 {
compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
- reg = <0 0x01c06000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "refgen";
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
@@ -1889,18 +1895,6 @@ pcie0_phy: phy@1c06000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie0_lane: phy@1c06200 {
- reg = <0 0x01c06200 0 0x170>, /* tx */
- <0 0x01c06400 0 0x200>, /* rx */
- <0 0x01c06800 0 0x1f0>, /* pcs */
- <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
- clock-output-names = "pcie_0_pipe_clk";
- };
};
pcie1: pci@1c08000 {
@@ -1958,7 +1952,7 @@ pcie1: pci@1c08000 {
power-domains = <&gcc PCIE_1_GDSC>;
- phys = <&pcie1_lane>;
+ phys = <&pcie1_phy>;
phy-names = "pciephy";
perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
@@ -1972,14 +1966,20 @@ pcie1: pci@1c08000 {
pcie1_phy: phy@1c0e000 {
compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
- reg = <0 0x01c0e000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01c0e000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
- clock-names = "aux", "cfg_ahb", "refgen";
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
@@ -1988,20 +1988,6 @@ pcie1_phy: phy@1c0e000 {
assigned-clock-rates = <100000000>;
status = "disabled";
-
- pcie1_lane: phy@1c0e200 {
- reg = <0 0x01c0e200 0 0x170>, /* tx0 */
- <0 0x01c0e400 0 0x200>, /* rx0 */
- <0 0x01c0ea00 0 0x1f0>, /* pcs */
- <0 0x01c0e600 0 0x170>, /* tx1 */
- <0 0x01c0e800 0 0x200>, /* rx1 */
- <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe0";
-
- #phy-cells = <0>;
- clock-output-names = "pcie_1_pipe_clk";
- };
};
ufs_mem_hc: ufshc@1d84000 {
--
2.30.2
