[PATCH 31/41] arm64: dts: qcom: ipq6018: switch PCIe QMP PHY to new style of bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 32 ++++++++++-----------------
 1 file changed, 12 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index ff540bfcc062..9a2daab5ff15 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -255,33 +255,25 @@ qusb_phy_0: qusb@79000 {
 
 		pcie_phy: phy@84000 {
 			compatible = "qcom,ipq6018-qmp-pcie-phy";
-			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+			reg = <0x0 0x00084000 0x0 0x1000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
-				<&gcc GCC_PCIE0_AHB_CLK>;
-			clock-names = "aux", "cfg_ahb";
+				<&gcc GCC_PCIE0_AHB_CLK>,
+				<&gcc GCC_PCIE0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "pipe";
+
+			clock-output-names = "gcc_pcie0_pipe_clk_src";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE0_PHY_BCR>,
 				<&gcc GCC_PCIE0PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
-
-			pcie_phy0: phy@84200 {
-				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
-				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
-				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
-				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
-				#phy-cells = <0>;
-
-				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "gcc_pcie0_pipe_clk_src";
-				#clock-cells = <0>;
-			};
 		};
 
 		mdio: mdio@90000 {
@@ -728,7 +720,7 @@ pcie0: pci@20000000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			phys = <&pcie_phy0>;
+			phys = <&pcie_phy>;
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
-- 
2.30.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux