[PATCH 21/41] arm64: dts: qcom: sm8250: switch USB+DP QMP PHY to new style of bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 49 ++++++++--------------------
 1 file changed, 14 insertions(+), 35 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 0b9ca147c1b4..e7b1c9fc13c5 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8250.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -3527,48 +3528,26 @@ usb_2_hsphy: phy@88e4000 {
 			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
 			compatible = "qcom,sm8250-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
+			reg = <0 0x088e8000 0 0x3000>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "ref_clk_src", "com_aux";
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "com_aux",
+				      "usb3_pipe";
 
 			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
 				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
-				reg = <0 0x088e9200 0 0x200>,
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
-
-			dp_phy: dp-phy@88ea200 {
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <1>;
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -3707,7 +3686,7 @@ usb_1_dwc3: usb@a600000 {
 				iommus = <&apps_smmu 0x0 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
@@ -4397,8 +4376,8 @@ dispcc: clock-controller@af00000 {
 				 <&dsi0_phy 1>,
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
-				 <&dp_phy 0>,
-				 <&dp_phy 1>;
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
-- 
2.30.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux