Migrate legacy bindings (described in qcom,sc7180-qmp-usb3-dp-phy.yaml) to qcom,sc8280xp-qmp-usb43dp-phy.yaml. This removes a need to declare the child PHY node or split resource regions. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 276 ------------------ .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 124 +++++++- 2 files changed, 111 insertions(+), 289 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml deleted file mode 100644 index 0ef2c9b9d466..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ /dev/null @@ -1,276 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) - -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm QMP USB3 DP PHY controller (SC7180) - -description: - The QMP PHY controller supports physical layer functionality for a number of - controllers on Qualcomm chipsets, such as, PCIe, UFS and USB. - - Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see - qcom,sc8280xp-qmp-usb43dp-phy.yaml. - -maintainers: - - Wesley Cheng <quic_wcheng@xxxxxxxxxxx> - -properties: - compatible: - oneOf: - - enum: - - qcom,sc7180-qmp-usb3-dp-phy - - qcom,sc8180x-qmp-usb3-dp-phy - - qcom,sdm845-qmp-usb3-dp-phy - - qcom,sm8250-qmp-usb3-dp-phy - - items: - - enum: - - qcom,sc7280-qmp-usb3-dp-phy - - const: qcom,sm8250-qmp-usb3-dp-phy - - reg: - items: - - description: Address and length of PHY's USB serdes block. - - description: Address and length of the DP_COM control block. - - description: Address and length of PHY's DP serdes block. - - reg-names: - items: - - const: usb - - const: dp_com - - const: dp - - "#address-cells": - enum: [ 1, 2 ] - - "#size-cells": - enum: [ 1, 2 ] - - ranges: true - - clocks: - minItems: 3 - maxItems: 4 - - clock-names: - minItems: 3 - maxItems: 4 - - power-domains: - maxItems: 1 - - resets: - items: - - description: reset of phy block. - - description: phy common block reset. - - reset-names: - items: - - const: phy - - const: common - - vdda-phy-supply: - description: - Phandle to a regulator supply to PHY core block. - - vdda-pll-supply: - description: - Phandle to 1.8V regulator supply to PHY refclk pll block. - - vddp-ref-clk-supply: - description: - Phandle to a regulator supply to any specific refclk pll block. - -# Required nodes: -patternProperties: - "^usb3-phy@[0-9a-f]+$": - type: object - additionalProperties: false - description: - The USB3 PHY. - - properties: - reg: - items: - - description: Address and length of TX. - - description: Address and length of RX. - - description: Address and length of PCS. - - description: Address and length of TX2. - - description: Address and length of RX2. - - description: Address and length of pcs_misc. - - clocks: - items: - - description: pipe clock - - clock-names: - deprecated: true - items: - - const: pipe0 - - clock-output-names: - items: - - const: usb3_phy_pipe_clk_src - - '#clock-cells': - const: 0 - - '#phy-cells': - const: 0 - - required: - - reg - - clocks - - '#clock-cells' - - '#phy-cells' - - "^dp-phy@[0-9a-f]+$": - type: object - additionalProperties: false - description: - The DP PHY. - - properties: - reg: - items: - - description: Address and length of TX. - - description: Address and length of RX. - - description: Address and length of PCS. - - description: Address and length of TX2. - - description: Address and length of RX2. - - '#clock-cells': - const: 1 - - '#phy-cells': - const: 0 - - required: - - reg - - '#clock-cells' - - '#phy-cells' - -required: - - compatible - - reg - - "#address-cells" - - "#size-cells" - - ranges - - clocks - - clock-names - - resets - - reset-names - - vdda-phy-supply - - vdda-pll-supply - -allOf: - - if: - properties: - compatible: - enum: - - qcom,sc7180-qmp-usb3-dp-phy - - qcom,sdm845-qmp-usb3-dp-phy - then: - properties: - clocks: - items: - - description: Phy aux clock - - description: Phy config clock - - description: 19.2 MHz ref clk - - description: Phy common block aux clock - clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux - - - if: - properties: - compatible: - enum: - - qcom,sc8180x-qmp-usb3-dp-phy - then: - properties: - clocks: - items: - - description: Phy aux clock - - description: 19.2 MHz ref clk - - description: Phy common block aux clock - clock-names: - items: - - const: aux - - const: ref - - const: com_aux - - - if: - properties: - compatible: - enum: - - qcom,sm8250-qmp-usb3-dp-phy - then: - properties: - clocks: - items: - - description: Phy aux clock - - description: Board XO source - - description: Phy common block aux clock - clock-names: - items: - - const: aux - - const: ref_clk_src - - const: com_aux - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/qcom,gcc-sdm845.h> - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sdm845-qmp-usb3-dp-phy"; - reg = <0x088e9000 0x18c>, - <0x088e8000 0x10>, - <0x088ea000 0x40>; - reg-names = "usb", "dp_com", "dp"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x088e9000 0x2000>; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; - - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - vdda-phy-supply = <&vdda_usb2_ss_1p2>; - vdda-pll-supply = <&vdda_usb2_ss_core>; - - usb3-phy@200 { - reg = <0x200 0x128>, - <0x400 0x200>, - <0xc00 0x218>, - <0x600 0x128>, - <0x800 0x200>, - <0xa00 0x100>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; - - dp-phy@88ea200 { - reg = <0xa200 0x200>, - <0xa400 0x200>, - <0xaa00 0x200>, - <0xa600 0x200>, - <0xa800 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 3cd5fc3e8fab..484f321aefce 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -15,25 +15,32 @@ description: properties: compatible: - enum: - - qcom,sc8280xp-qmp-usb43dp-phy - - qcom,sm6350-qmp-usb3-dp-phy - - qcom,sm8350-qmp-usb3-dp-phy - - qcom,sm8450-qmp-usb3-dp-phy - - qcom,sm8550-qmp-usb3-dp-phy + oneOf: + - enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sc8180x-qmp-usb3-dp-phy + - qcom,sc8280xp-qmp-usb43dp-phy + - qcom,sdm845-qmp-usb3-dp-phy + - qcom,sm6350-qmp-usb3-dp-phy + - qcom,sm8250-qmp-usb3-dp-phy + - qcom,sm8350-qmp-usb3-dp-phy + - qcom,sm8450-qmp-usb3-dp-phy + - qcom,sm8550-qmp-usb3-dp-phy + - items: + - enum: + - qcom,sc7280-qmp-usb3-dp-phy + - const: qcom,sm8250-qmp-usb3-dp-phy reg: maxItems: 1 clocks: - maxItems: 4 + minItems: 3 + maxItems: 5 clock-names: - items: - - const: aux - - const: ref - - const: com_aux - - const: usb3_pipe + minItems: 3 + maxItems: 5 power-domains: maxItems: 1 @@ -50,6 +57,8 @@ properties: vdda-pll-supply: true + vddp-ref-clk-supply: true + "#clock-cells": const: 1 description: @@ -65,7 +74,6 @@ required: - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -73,6 +81,71 @@ required: - "#clock-cells" - "#phy-cells" +allOf: + - if: + properties: + compatible: + enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sdm845-qmp-usb3-dp-phy + then: + properties: + clocks: + items: + - description: Phy aux clock + - description: Phy config clock + - description: 19.2 MHz ref clk + - description: Phy common block aux clock + - description: USB3 PIPE clock + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + - const: usb3_pipe + + - if: + properties: + compatible: + enum: + - qcom,sc8180x-qmp-usb3-dp-phy + - qcom,sc8280xp-qmp-usb3-dp-phy + then: + properties: + clocks: + items: + - description: Phy aux clock + - description: 19.2 MHz ref clk + - description: Phy common block aux clock + - description: USB3 PIPE clock + clock-names: + items: + - const: aux + - const: ref + - const: com_aux + - const: usb3_pipe + + - if: + properties: + compatible: + enum: + - qcom,sm8250-qmp-usb3-dp-phy + then: + properties: + clocks: + items: + - description: Phy aux clock + - description: Board XO source + - description: Phy common block aux clock + - description: USB3 PIPE clock + clock-names: + items: + - const: aux + - const: ref_clk_src + - const: com_aux + - const: usb3_pipe + additionalProperties: false examples: @@ -101,3 +174,28 @@ examples: #clock-cells = <1>; #phy-cells = <1>; }; + - | + #define GCC_USB3_PRIM_CLKREF_CLK 151 + #define GCC_USB_PHY_CFG_AHB2PHY_CLK 161 + + phy@88e8000 { + compatible = "qcom,sdm845-qmp-usb3-dp-phy"; + reg = <0x088e8000 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux", "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + #clock-cells = <1>; + #phy-cells = <1>; + }; -- 2.30.2
