[PATCH 1/2] arm64: dts: qcom: ipq8074-hk01: enable QMP device, not the PHY node

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

Correct PCIe PHY enablement to refer the QMP device nodes rather than
PHY device nodes. QMP nodes have 'status = "disabled"' property in the
ipq8074.dtsi, while PHY nodes do not correspond to the actual device and
do not have the status property.

Fixes: e8a7fdc505bb ("arm64: dts: ipq8074: qcom: Re-arrange dts nodes based on address")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index ca3f96646b90..5cf07caf4103 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -62,11 +62,11 @@ &pcie1 {
 	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
-&pcie_phy0 {
+&pcie_qmp0 {
 	status = "okay";
 };
 
-&pcie_phy1 {
+&pcie_qmp1 {
 	status = "okay";
 };
 
-- 
2.30.2