[PATCH 09/14] arm64: dts: qcom: sc7180: Remove superfluous "input-enable"s from trogdor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As talked about in the patch ("dt-bindings: pinctrl: qcom: tlmm should
use output-disable, not input-enable"), using "input-enable" in
pinctrl states for Qualcomm TLMM pinctrl devices was either
superfluous or there to disable a pin's output.

Looking at trogdor:
* ap_ec_int_l, fp_to_ap_irq_l, h1_ap_int_odl, p_sensor_int_l:
  Superfluous. The pins will be configured as inputs automatically by
  the Linux GPIO subsystem (presumably the reference for other OSes
  using these device trees).
* bios_flash_wp_l: Superfluous. This pin is exposed to userspace
  through the kernel's GPIO API and will be configured automatically.

That means that in none of the cases for trogdor did we need to change
"input-enable" to "output-disable" and we can just remove these
superfluous properties.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 1f2e1f701761..39100b0c1140 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1206,7 +1206,6 @@ amp_en: amp-en-state {
 	ap_ec_int_l: ap-ec-int-l-state {
 		pins = "gpio94";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -1229,7 +1228,6 @@ ap_suspend_l_neuter: ap-suspend-l-neuter-state {
 	bios_flash_wp_l: bios-flash-wp-l-state {
 		pins = "gpio66";
 		function = "gpio";
-		input-enable;
 		bias-disable;
 	};
 
@@ -1271,7 +1269,6 @@ fp_rst_l: fp-rst-l-state {
 	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
 		pins = "gpio4";
 		function = "gpio";
-		input-enable;
 
 		/* Has external pullup */
 		bias-disable;
@@ -1286,7 +1283,6 @@ fpmcu_boot0: fpmcu-boot0-state {
 	h1_ap_int_odl: h1-ap-int-odl-state {
 		pins = "gpio42";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -1335,7 +1331,6 @@ pen_rst_odl: pen-rst-odl-state {
 	p_sensor_int_l: p-sensor-int-l-state {
 		pins = "gpio24";
 		function = "gpio";
-		input-enable;
 
 		/* Has external pullup */
 		bias-disable;
-- 
2.40.0.348.gf938b09366-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux