On 23/03/2023 06:04, Tao Zhang wrote:
Add the nodes to set value for DSB edge control and DSB edge
control mask. Each DSB subunit TPDM has maximum of n(n<16) EDCR
resgisters to configure edge control. DSB edge detection control
00: Rising edge detection
01: Falling edge detection
10: Rising and falling edge detection (toggle detection) > And each DSB subunit TPDM has maximum of m(m<8) ECDMR registers to
configure mask. Eight 32 bit registers providing DSB interface
edge detection mask control.
Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
---
.../ABI/testing/sysfs-bus-coresight-devices-tpdm | 26 ++++
drivers/hwtracing/coresight/coresight-tpdm.c | 142 ++++++++++++++++++++-
drivers/hwtracing/coresight/coresight-tpdm.h | 14 ++
3 files changed, 181 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
index f13e282..094d624 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@@ -45,3 +45,29 @@ Description:
tpdm.
Accepts the value needs to be greater than 0.
+
+What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge_ctrl
+Date: March 2023
+KernelVersion 6.3
+Contact: Jinlong Mao (QUIC) <quic_jinlmao@xxxxxxxxxxx>, Tao Zhang (QUIC) <quic_taozha@xxxxxxxxxxx>
+Description:
+ (Write) Set the edge control of DSB tpdm. Read the
+ edge control of DSB tpdm.
Could we not say :
Read / Write a set of the edge control registers of the DSB in
TPDM
+
+ Accepts the following three values.
This is a bit confusing, at least to me. This could either mean,
a single write of values 1-3 are accepted.
+ value 1: Start EDCR register number
+ value 2: End EDCR register number
+ value 3: The value need to be written
But you really mean to say, the writes must be of the following format
<integer1> <integer2> <integer3>
where :
<integer1> : Start EDCR ...
....
+
+What: /sys/bus/coresight/devices/<tpdm-name>/dsb_edge_ctrl_mask
+Date: March 2023
+KernelVersion 6.3
+Contact: Jinlong Mao (QUIC) <quic_jinlmao@xxxxxxxxxxx>, Tao Zhang (QUIC) <quic_taozha@xxxxxxxxxxx>
+Description:
+ (Write) Set the edge control mask of DSB tpdm. Read
+ the edge control mask of DSB tpdm.
+
+ Accepts the following three values.
+ value 1: Start EDCMR register number
+ value 2: End EDCMR register number
+ value 3: The value need to be written
Similarly here.
diff --git a/drivers/hwtracing/coresight/coresight-tpdm.c b/drivers/hwtracing/coresight/coresight-tpdm.c
index 8cd822f..2a0b36c 100644
--- a/drivers/hwtracing/coresight/coresight-tpdm.c
+++ b/drivers/hwtracing/coresight/coresight-tpdm.c
@@ -88,7 +88,14 @@ static void set_trigger_type(struct tpdm_drvdata *drvdata, u32 *val)
static void tpdm_enable_dsb(struct tpdm_drvdata *drvdata)
{
- u32 val;
+ u32 val, i;
+
+ for (i = 0; i < TPDM_DSB_MAX_EDCR; i++)
+ writel_relaxed(drvdata->dsb->edge_ctrl[i],
+ drvdata->base + TPDM_DSB_EDCR(i));
+ for (i = 0; i < TPDM_DSB_MAX_EDCMR; i++)
+ writel_relaxed(drvdata->dsb->edge_ctrl_mask[i],
+ drvdata->base + TPDM_DSB_EDCMR(i));
val = readl_relaxed(drvdata->base + TPDM_DSB_TIER);
/* Set trigger timestamp */
@@ -311,6 +318,137 @@ static ssize_t dsb_mode_store(struct device *dev,
}
static DEVICE_ATTR_RW(dsb_mode);
+static ssize_t dsb_edge_ctrl_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ ssize_t size = 0;
+ int i;
+
+ spin_lock(&drvdata->spinlock);
+ for (i = 0; i < TPDM_DSB_MAX_EDCR; i++) {
+ size += sysfs_emit_at(buf, size,
+ "Index:0x%x Val:0x%x\n", i,
+ drvdata->dsb->edge_ctrl[i]);
+ }
+ spin_unlock(&drvdata->spinlock);
+ return size;
+}
+
+/*
+ * value 1: Start EDCR register number
+ * value 2: End EDCR register number
+ * value 3: The value need to be written
+ * The EDCR registers can include up to 16 32-bit registers, and each
+ * one can be configured to control up to 16 edge detections(2 bits
+ * control one edge detection). So a total 256 edge detections can be
+ * configured. So the starting number(value 1) and ending number(value 2)
+ * cannot be greater than 256, and value 1 should be less than value 2.
+ * The following values are the rage of value 3.
+ * 0 - Rising edge detection
+ * 1 - Falling edge detection
+ * 2 - Rising and falling edge detection (toggle detection)
+ */
+static ssize_t dsb_edge_ctrl_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ unsigned long start, end, edge_ctrl;
+ uint32_t val;
+ int i, index, bit, reg;
+
+ if (sscanf(buf, "%lx %lx %lx", &start, &end, &edge_ctrl) != 3)
+ return -EINVAL;
+ if ((start >= TPDM_DSB_MAX_LINES) || (end >= TPDM_DSB_MAX_LINES) ||
+ edge_ctrl > 0x2)
+ return -EPERM;
Isn't it an error to provide start > end ?
+
+ spin_lock(&drvdata->spinlock);
+ for (i = start; i <= end; i++) {
+ /*
+ * The 32-bit register has 32 bits(NUM_OF_BITS).
+ * Each one register can be configured to control 16
+ * (NUM_OF_BITS / 2) edge detectioins.
+ */
/*
* Each DSB Edge control line requires 2bits.
* Thus we have 16 lines in a 32bit word.
*/
Could we please define something like:
#define EDCRS_PER_WORD 16
#define EDCR_TO_WORD_IDX(r) ((r) / EDCRS_PER_WORD)
#define EDCR_TO_WORD_SHIFT(r) ((r) % EDCRS_PER_WORD)
#define EDCR_TO_WORD_MASK(r) (0x3 << EDCR_TO_WORD_SHIFT((r)))
+ reg = i / (NUM_OF_BITS / 2);
+ index = i % (NUM_OF_BITS / 2);
+ bit = index * 2;
+
reg = EDCR_TO_WORD_IDX(i);
mask = EDCR_TO_WORD_MASK(i);
val &= ~mask;
val |= FIELD_PREP(mask, edge_ctrl);
+ val = drvdata->dsb->edge_ctrl[reg];
+ val &= ~GENMASK((bit + 1), bit);
+ val |= (edge_ctrl << bit);
+ drvdata->dsb->edge_ctrl[reg] = val;
+ }
+ spin_unlock(&drvdata->spinlock);
+
+ return size;
+}
+static DEVICE_ATTR_RW(dsb_edge_ctrl);
+
+static ssize_t dsb_edge_ctrl_mask_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ ssize_t size = 0;
+ int i;
+
+ spin_lock(&drvdata->spinlock);
+ for (i = 0; i < TPDM_DSB_MAX_EDCR / 2; i++) {
Why is this not `i < TPDM_DSB_MAX_EDCMR` ?
+ size += sysfs_emit_at(buf, size,
+ "Index:0x%x Val:0x%x\n", i,
+ drvdata->dsb->edge_ctrl_mask[i]);
+ }
+ spin_unlock(&drvdata->spinlock);
+ return size;
+}
+
+/*
+ * value 1: Start EDCMR register number
+ * value 2: End EDCMR register number
+ * value 3: The value need to be written
+ */
+static ssize_t dsb_edge_ctrl_mask_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ struct tpdm_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ unsigned long start, end, val;
+ u32 set;
+ int i, index, reg;
+
+ if (sscanf(buf, "%lx %lx %lx", &start, &end, &val) != 3)
+ return -EINVAL;
+ if ((start >= TPDM_DSB_MAX_LINES) || (end >= TPDM_DSB_MAX_LINES)
+ || (val & ~1UL))
+ return -EPERM;
+
+ spin_lock(&drvdata->spinlock);
+ for (i = start; i <= end; i++) {
+ /*
+ * The 32-bit register has 32 bits(NUM_OF_BITS).
+ * Each one register can be configured to control 32
+ * (NUM_OF_BITS) edge detectioin masks.
minor nit: detection.
You could simply say:
/*
* There is 1 bit per DSB Edge Control line.
* Thus we have 32 lines in a 32bit word.
*/
reg = i / 32;
+ reg = i / NUM_OF_BITS;
+ index = (i % NUM_OF_BITS);
+
+ set = drvdata->dsb->edge_ctrl_mask[reg];
+ if (val)
+ set |= BIT(index);
+ else
+ set &= ~BIT(index);
+ drvdata->dsb->edge_ctrl_mask[reg] = set;
+ }
+ spin_unlock(&drvdata->spinlock);
+ return size;
+}
+static DEVICE_ATTR_RW(dsb_edge_ctrl_mask);
+
static ssize_t dsb_trig_type_show(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -383,6 +521,8 @@ static DEVICE_ATTR_RW(dsb_trig_ts);
static struct attribute *tpdm_dsb_attrs[] = {
&dev_attr_dsb_mode.attr,
+ &dev_attr_dsb_edge_ctrl.attr,
+ &dev_attr_dsb_edge_ctrl_mask.attr,
&dev_attr_dsb_trig_ts.attr,
&dev_attr_dsb_trig_type.attr,
NULL,
diff --git a/drivers/hwtracing/coresight/coresight-tpdm.h b/drivers/hwtracing/coresight/coresight-tpdm.h
index 8fee562..342ef23 100644
--- a/drivers/hwtracing/coresight/coresight-tpdm.h
+++ b/drivers/hwtracing/coresight/coresight-tpdm.h
@@ -12,6 +12,8 @@
/* DSB Subunit Registers */
#define TPDM_DSB_CR (0x780)
#define TPDM_DSB_TIER (0x784)
+#define TPDM_DSB_EDCR(n) (0x808 + (n * 4))
+#define TPDM_DSB_EDCMR(n) (0x848 + (n * 4))
/* Enable bit for DSB subunit */
#define TPDM_DSB_CR_ENA BIT(0)
@@ -31,6 +33,8 @@
#define TPDM_DSB_TEST_MODE GENMASK(11, 9)
#define TPDM_DSB_HPSEL GENMASK(6, 2)
+#define NUM_OF_BITS 32
Please don't use such generic names. Instead define TPDM specific
helper definitions. See above.
Suzuki
+
/* TPDM integration test registers */
#define TPDM_ITATBCNTRL (0xEF0)
#define TPDM_ITCNTRL (0xF00)
@@ -57,14 +61,24 @@
#define TPDM_PIDR0_DS_IMPDEF BIT(0)
#define TPDM_PIDR0_DS_DSB BIT(1)
+#define TPDM_DSB_MAX_LINES 256
+/* MAX number of EDCR registers */
+#define TPDM_DSB_MAX_EDCR 16 > +/* MAX number of EDCMR registers */
+#define TPDM_DSB_MAX_EDCMR 8
+
/**
* struct dsb_dataset - specifics associated to dsb dataset
* @mode: DSB programming mode
+ * @edge_ctrl: Save value for edge control
+ * @edge_ctrl_mask: Save value for edge control mask
* @trig_ts: Enable/Disable trigger timestamp.
* @trig_type: Enable/Disable trigger type.
*/
struct dsb_dataset {
u32 mode;
+ u32 edge_ctrl[TPDM_DSB_MAX_EDCR];
+ u32 edge_ctrl_mask[TPDM_DSB_MAX_EDCMR];
bool trig_ts;
bool trig_type;
};
