Re: [net-next PATCH v5 13/15] arm: qcom: dt: Add Switch LED for each port for rb3011

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 2023-03-19 20:18:12, Christian Marangi wrote:
> Add Switch LED for each port for MikroTik RB3011UiAS-RM.
> 
> MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
> connected.
> 
> It was discovered that in the hardware design all 3 Switch LED trace of
> the related port is connected to the same LED. This was discovered by
> setting to 'always on' the related led in the switch regs and noticing
> that all 3 LED for the specific port (for example for port 1) cause the
> connected LED for port 1 to turn on. As an extra test we tried enabling
> 2 different LED for the port resulting in the LED turned off only if
> every led in the reg was off.
> 
> Aside from this funny and strange hardware implementation, the device
> itself have one green LED for each port, resulting in 10 green LED one
> for each of the 10 supported port.
> 
> Cc: Jonathan McDowell <noodles@xxxxxxxx>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>

Reviewed-by: Pavel Machek <pavel@xxxxxx>

-- 
People of Russia, stop Putin before his war on Ukraine escalates.

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux