On Tue, Mar 21, 2023 at 02:21:41PM +0100, Neil Armstrong wrote:
> Introduce the UCSI PMIC Glink aux driver that communicates
> with the aDSP firmware with the UCSI protocol which handles
> the USB-C Port(s) Power Delivery.
>
> The UCSI messaging is necessary on newer Qualcomm SoCs to
> provide USB role switch and altmode notifications.
>
> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Greg, this has no build time dependencies to the remainder of the
series, so can you pick this patch 1 and patch 5 (dt-bindings: usb:
snps,dwc3: document HS & SS OF graph ports) through your tree?
I'll pick up the remainder through the Qualcomm tree.
Regards,
Bjorn
> ---
> drivers/usb/typec/ucsi/Kconfig | 10 ++
> drivers/usb/typec/ucsi/Makefile | 1 +
> drivers/usb/typec/ucsi/ucsi_glink.c | 345 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 356 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> index 8f9c4b9f31f7..b3bb0191987e 100644
> --- a/drivers/usb/typec/ucsi/Kconfig
> +++ b/drivers/usb/typec/ucsi/Kconfig
> @@ -58,4 +58,14 @@ config UCSI_STM32G0
> To compile the driver as a module, choose M here: the module will be
> called ucsi_stm32g0.
>
> +config UCSI_PMIC_GLINK
> + tristate "UCSI Qualcomm PMIC GLINK Interface Driver"
> + depends on QCOM_PMIC_GLINK
> + help
> + This driver enables UCSI support on platforms that expose UCSI
> + interface as PMIC GLINK device.
> +
> + To compile the driver as a module, choose M here: the module will be
> + called ucsi_glink.
> +
> endif
> diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> index 480d533d762f..77f09e136956 100644
> --- a/drivers/usb/typec/ucsi/Makefile
> +++ b/drivers/usb/typec/ucsi/Makefile
> @@ -18,3 +18,4 @@ endif
> obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> +obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
> new file mode 100644
> index 000000000000..b454a5159896
> --- /dev/null
> +++ b/drivers/usb/typec/ucsi/ucsi_glink.c
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2023, Linaro Ltd
> + */
> +#include <linux/auxiliary_bus.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/mutex.h>
> +#include <linux/property.h>
> +#include <linux/soc/qcom/pdr.h>
> +#include <linux/soc/qcom/pmic_glink.h>
> +#include "ucsi.h"
> +
> +#define UCSI_BUF_SIZE 48
> +
> +#define MSG_TYPE_REQ_RESP 1
> +#define UCSI_BUF_SIZE 48
> +
> +#define UC_NOTIFY_RECEIVER_UCSI 0x0
> +#define UC_UCSI_READ_BUF_REQ 0x11
> +#define UC_UCSI_WRITE_BUF_REQ 0x12
> +#define UC_UCSI_USBC_NOTIFY_IND 0x13
> +
> +struct ucsi_read_buf_req_msg {
> + struct pmic_glink_hdr hdr;
> +};
> +
> +struct ucsi_read_buf_resp_msg {
> + struct pmic_glink_hdr hdr;
> + u8 buf[UCSI_BUF_SIZE];
> + u32 ret_code;
> +};
> +
> +struct ucsi_write_buf_req_msg {
> + struct pmic_glink_hdr hdr;
> + u8 buf[UCSI_BUF_SIZE];
> + u32 reserved;
> +};
> +
> +struct ucsi_write_buf_resp_msg {
> + struct pmic_glink_hdr hdr;
> + u32 ret_code;
> +};
> +
> +struct ucsi_notify_ind_msg {
> + struct pmic_glink_hdr hdr;
> + u32 notification;
> + u32 receiver;
> + u32 reserved;
> +};
> +
> +struct pmic_glink_ucsi {
> + struct device *dev;
> +
> + struct pmic_glink_client *client;
> +
> + struct ucsi *ucsi;
> + struct completion read_ack;
> + struct completion write_ack;
> + struct completion sync_ack;
> + bool sync_pending;
> + struct mutex lock; /* protects concurrent access to PMIC Glink interface */
> +
> + int sync_val;
> +
> + struct work_struct notify_work;
> + struct work_struct register_work;
> +
> + u8 read_buf[UCSI_BUF_SIZE];
> +};
> +
> +static int pmic_glink_ucsi_read(struct ucsi *__ucsi, unsigned int offset,
> + void *val, size_t val_len)
> +{
> + struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi);
> + struct ucsi_read_buf_req_msg req = {};
> + unsigned long left;
> + int ret;
> +
> + req.hdr.owner = PMIC_GLINK_OWNER_USBC;
> + req.hdr.type = MSG_TYPE_REQ_RESP;
> + req.hdr.opcode = UC_UCSI_READ_BUF_REQ;
> +
> + mutex_lock(&ucsi->lock);
> + memset(ucsi->read_buf, 0, sizeof(ucsi->read_buf));
> + reinit_completion(&ucsi->read_ack);
> +
> + ret = pmic_glink_send(ucsi->client, &req, sizeof(req));
> + if (ret < 0) {
> + dev_err(ucsi->dev, "failed to send UCSI read request: %d\n", ret);
> + goto out_unlock;
> + }
> +
> + left = wait_for_completion_timeout(&ucsi->read_ack, 5 * HZ);
> + if (!left) {
> + dev_err(ucsi->dev, "timeout waiting for UCSI read response\n");
> + ret = -ETIMEDOUT;
> + goto out_unlock;
> + }
> +
> + memcpy(val, &ucsi->read_buf[offset], val_len);
> + ret = 0;
> +
> +out_unlock:
> + mutex_unlock(&ucsi->lock);
> +
> + return ret;
> +}
> +
> +static int pmic_glink_ucsi_locked_write(struct pmic_glink_ucsi *ucsi, unsigned int offset,
> + const void *val, size_t val_len)
> +{
> + struct ucsi_write_buf_req_msg req = {};
> + unsigned long left;
> + int ret;
> +
> + req.hdr.owner = PMIC_GLINK_OWNER_USBC;
> + req.hdr.type = MSG_TYPE_REQ_RESP;
> + req.hdr.opcode = UC_UCSI_WRITE_BUF_REQ;
> + memcpy(&req.buf[offset], val, val_len);
> +
> + reinit_completion(&ucsi->write_ack);
> +
> + ret = pmic_glink_send(ucsi->client, &req, sizeof(req));
> + if (ret < 0) {
> + dev_err(ucsi->dev, "failed to send UCSI write request: %d\n", ret);
> + return ret;
> + }
> +
> + left = wait_for_completion_timeout(&ucsi->write_ack, 5 * HZ);
> + if (!left) {
> + dev_err(ucsi->dev, "timeout waiting for UCSI write response\n");
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
> +
> +static int pmic_glink_ucsi_async_write(struct ucsi *__ucsi, unsigned int offset,
> + const void *val, size_t val_len)
> +{
> + struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi);
> + int ret;
> +
> + mutex_lock(&ucsi->lock);
> + ret = pmic_glink_ucsi_locked_write(ucsi, offset, val, val_len);
> + mutex_unlock(&ucsi->lock);
> +
> + return ret;
> +}
> +
> +static int pmic_glink_ucsi_sync_write(struct ucsi *__ucsi, unsigned int offset,
> + const void *val, size_t val_len)
> +{
> + struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi);
> + unsigned long left;
> + int ret;
> +
> + /* TOFIX: Downstream forces recipient to CON when UCSI_GET_ALTERNATE_MODES command */
> +
> + mutex_lock(&ucsi->lock);
> + ucsi->sync_val = 0;
> + reinit_completion(&ucsi->sync_ack);
> + ucsi->sync_pending = true;
> + ret = pmic_glink_ucsi_locked_write(ucsi, offset, val, val_len);
> + mutex_unlock(&ucsi->lock);
> +
> + left = wait_for_completion_timeout(&ucsi->sync_ack, 5 * HZ);
> + if (!left) {
> + dev_err(ucsi->dev, "timeout waiting for UCSI sync write response\n");
> + ret = -ETIMEDOUT;
> + } else if (ucsi->sync_val) {
> + dev_err(ucsi->dev, "sync write returned: %d\n", ucsi->sync_val);
> + }
> +
> + ucsi->sync_pending = false;
> +
> + return ret;
> +}
> +
> +static const struct ucsi_operations pmic_glink_ucsi_ops = {
> + .read = pmic_glink_ucsi_read,
> + .sync_write = pmic_glink_ucsi_sync_write,
> + .async_write = pmic_glink_ucsi_async_write
> +};
> +
> +static void pmic_glink_ucsi_read_ack(struct pmic_glink_ucsi *ucsi, const void *data, int len)
> +{
> + const struct ucsi_read_buf_resp_msg *resp = data;
> +
> + if (resp->ret_code)
> + return;
> +
> + memcpy(ucsi->read_buf, resp->buf, UCSI_BUF_SIZE);
> + complete(&ucsi->read_ack);
> +}
> +
> +static void pmic_glink_ucsi_write_ack(struct pmic_glink_ucsi *ucsi, const void *data, int len)
> +{
> + const struct ucsi_write_buf_resp_msg *resp = data;
> +
> + if (resp->ret_code)
> + return;
> +
> + ucsi->sync_val = resp->ret_code;
> + complete(&ucsi->write_ack);
> +}
> +
> +static void pmic_glink_ucsi_notify(struct work_struct *work)
> +{
> + struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, notify_work);
> + unsigned int con_num;
> + u32 cci;
> + int ret;
> +
> + ret = pmic_glink_ucsi_read(ucsi->ucsi, UCSI_CCI, &cci, sizeof(cci));
> + if (ret) {
> + dev_err(ucsi->dev, "failed to read CCI on notification\n");
> + return;
> + }
> +
> + con_num = UCSI_CCI_CONNECTOR(cci);
> + if (con_num)
> + ucsi_connector_change(ucsi->ucsi, con_num);
> +
> + if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) {
> + ucsi->sync_val = -EBUSY;
> + complete(&ucsi->sync_ack);
> + } else if (ucsi->sync_pending &&
> + (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) {
> + complete(&ucsi->sync_ack);
> + }
> +}
> +
> +static void pmic_glink_ucsi_register(struct work_struct *work)
> +{
> + struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, register_work);
> +
> + ucsi_register(ucsi->ucsi);
> +}
> +
> +static void pmic_glink_ucsi_callback(const void *data, size_t len, void *priv)
> +{
> + struct pmic_glink_ucsi *ucsi = priv;
> + const struct pmic_glink_hdr *hdr = data;
> +
> + switch (hdr->opcode) {
> + case UC_UCSI_READ_BUF_REQ:
> + pmic_glink_ucsi_read_ack(ucsi, data, len);
> + break;
> + case UC_UCSI_WRITE_BUF_REQ:
> + pmic_glink_ucsi_write_ack(ucsi, data, len);
> + break;
> + case UC_UCSI_USBC_NOTIFY_IND:
> + schedule_work(&ucsi->notify_work);
> + break;
> + };
> +}
> +
> +static void pmic_glink_ucsi_pdr_notify(void *priv, int state)
> +{
> + struct pmic_glink_ucsi *ucsi = priv;
> +
> + if (state == SERVREG_SERVICE_STATE_UP)
> + schedule_work(&ucsi->register_work);
> + else if (state == SERVREG_SERVICE_STATE_DOWN)
> + ucsi_unregister(ucsi->ucsi);
> +}
> +
> +static void pmic_glink_ucsi_destroy(void *data)
> +{
> + struct pmic_glink_ucsi *ucsi = data;
> +
> + /* Protect to make sure we're not in a middle of a transaction from a glink callback */
> + mutex_lock(&ucsi->lock);
> + ucsi_destroy(ucsi->ucsi);
> + mutex_unlock(&ucsi->lock);
> +}
> +
> +static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
> + const struct auxiliary_device_id *id)
> +{
> + struct pmic_glink_ucsi *ucsi;
> + struct device *dev = &adev->dev;
> + int ret;
> +
> + ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL);
> + if (!ucsi)
> + return -ENOMEM;
> +
> + ucsi->dev = dev;
> + dev_set_drvdata(dev, ucsi);
> +
> + INIT_WORK(&ucsi->notify_work, pmic_glink_ucsi_notify);
> + INIT_WORK(&ucsi->register_work, pmic_glink_ucsi_register);
> + init_completion(&ucsi->read_ack);
> + init_completion(&ucsi->write_ack);
> + init_completion(&ucsi->sync_ack);
> + mutex_init(&ucsi->lock);
> +
> + ucsi->ucsi = ucsi_create(dev, &pmic_glink_ucsi_ops);
> + if (IS_ERR(ucsi->ucsi))
> + return PTR_ERR(ucsi->ucsi);
> +
> + /* Make sure we destroy *after* pmic_glink unregister */
> + ret = devm_add_action_or_reset(dev, pmic_glink_ucsi_destroy, ucsi);
> + if (ret)
> + return ret;
> +
> + ucsi_set_drvdata(ucsi->ucsi, ucsi);
> +
> + ucsi->client = devm_pmic_glink_register_client(dev,
> + PMIC_GLINK_OWNER_USBC,
> + pmic_glink_ucsi_callback,
> + pmic_glink_ucsi_pdr_notify,
> + ucsi);
> + return PTR_ERR_OR_ZERO(ucsi->client);
> +}
> +
> +static void pmic_glink_ucsi_remove(struct auxiliary_device *adev)
> +{
> + struct pmic_glink_ucsi *ucsi = dev_get_drvdata(&adev->dev);
> +
> + /* Unregister first to stop having read & writes */
> + ucsi_unregister(ucsi->ucsi);
> +}
> +
> +static const struct auxiliary_device_id pmic_glink_ucsi_id_table[] = {
> + { .name = "pmic_glink.ucsi", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(auxiliary, pmic_glink_ucsi_id_table);
> +
> +static struct auxiliary_driver pmic_glink_ucsi_driver = {
> + .name = "pmic_glink_ucsi",
> + .probe = pmic_glink_ucsi_probe,
> + .remove = pmic_glink_ucsi_remove,
> + .id_table = pmic_glink_ucsi_id_table,
> +};
> +
> +module_auxiliary_driver(pmic_glink_ucsi_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm PMIC GLINK UCSI driver");
> +MODULE_LICENSE("GPL");
>
> --
> 2.34.1
>
