On Wed, Mar 22, 2023 at 12:31:15AM +0530, Bhupesh Sharma wrote:
> Add crypto engine (CE) and CE BAM related nodes and definitions to
> 'sm6115.dtsi'.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index c56738633431..b2d2cdde41fa 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -664,6 +664,32 @@ usb_1_hsphy: phy@1613000 {
> status = "disabled";
> };
>
> + cryptobam: dma-controller@1b04000 {
> + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> + reg = <0x0 0x01b04000 0x0 0x24000>;
> + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + qcom,controlled-remotely;
> + num-channels = <8>;
> + qcom,num-ees = <2>;
> + iommus = <&apps_smmu 0x84 0x11>,
> + <&apps_smmu 0x86 0x11>,
> + <&apps_smmu 0x94 0x11>,
> + <&apps_smmu 0x96 0x11>;
> + };
> +
> + crypto: crypto@1b3a000 {
> + compatible = "qcom,sm6115-qce", "qcom,sm8150-qce", "qcom,qce";
> + reg = <0x0 0x01b3a000 0x0 0x6000>;
> + dmas = <&cryptobam 6>, <&cryptobam 7>;
> + dma-names = "rx", "tx";
> + iommus = <&apps_smmu 0x84 0x11>,
> + <&apps_smmu 0x86 0x11>,
> + <&apps_smmu 0x94 0x11>,
> + <&apps_smmu 0x96 0x11>;
If you apply the 0x11 mask to the stream ID then the last two items here
are identical to the first two (0x94 & ~0x11 = 0x84). Why are they
needed? They look redundant to me.
Thanks,
Stephan
