On 20.03.2023 23:16, Andrew Halaney wrote:
> This platform has 2 MACs integrated in it, go ahead and describe them.
>
> Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> ---
>
> Changes since v1:
> * None
>
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 53 ++++++++++++++++++++++++++
> 1 file changed, 53 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 0d02599d8867..a63e8e81a8c4 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -761,6 +761,59 @@ soc: soc@0 {
> ranges = <0 0 0 0 0x10 0>;
> dma-ranges = <0 0 0 0 0x10 0>;
>
> + ethernet0: ethernet@20000 {
> + compatible = "qcom,sc8280xp-ethqos";
> + reg = <0x0 0x00020000 0x0 0x10000>,
> + <0x0 0x00036000 0x0 0x100>;
Please correct the indentation here.
> + reg-names = "stmmaceth", "rgmii";
> +
> + clocks = <&gcc GCC_EMAC0_AXI_CLK>,
> + <&gcc GCC_EMAC0_SLV_AHB_CLK>,
> + <&gcc GCC_EMAC0_PTP_CLK>,
> + <&gcc GCC_EMAC0_RGMII_CLK>;
Please correct the indentation here.
> + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
Please turn this into a vertical list.
> +
> + interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>;
Please correct the indentation here.
Same for the other node.
Konrad
> + interrupt-names = "macirq", "eth_lpi";
> + iommus = <&apps_smmu 0x4c0 0xf>;
> + power-domains = <&gcc EMAC_0_GDSC>;
> +
> + snps,tso;
> + snps,pbl = <32>;
> + rx-fifo-depth = <4096>;
> + tx-fifo-depth = <4096>;
> +
> + status = "disabled";
> + };
> +
> + ethernet1: ethernet@23000000 {
> + compatible = "qcom,sc8280xp-ethqos";
> + reg = <0x0 0x23000000 0x0 0x10000>,
> + <0x0 0x23016000 0x0 0x100>;
> + reg-names = "stmmaceth", "rgmii";
> +
> + clocks = <&gcc GCC_EMAC1_AXI_CLK>,
> + <&gcc GCC_EMAC1_SLV_AHB_CLK>,
> + <&gcc GCC_EMAC1_PTP_CLK>,
> + <&gcc GCC_EMAC1_RGMII_CLK>;
> + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
> +
> + interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq", "eth_lpi";
> +
> + iommus = <&apps_smmu 0x40 0xf>;
> + power-domains = <&gcc EMAC_1_GDSC>;
> +
> + snps,tso;
> + snps,pbl = <32>;
> + rx-fifo-depth = <4096>;
> + tx-fifo-depth = <4096>;
> +
> + status = "disabled";
> + };
> +
> gcc: clock-controller@100000 {
> compatible = "qcom,gcc-sc8280xp";
> reg = <0x0 0x00100000 0x0 0x1f0000>;
