Re: [PATCH 1/3] dt-bindings: wireless: add ath11k pcie bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 21, 2023 at 09:14:15AM +0100, Krzysztof Kozlowski wrote:
> On 20/03/2023 11:46, Johan Hovold wrote:
> > Add devicetree bindings for Qualcomm ath11k PCIe devices such as WCN6856
> > for which the calibration data variant may need to be described.
> > 
> > Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> > ---
> >  .../bindings/net/wireless/pci17cb,1103.yaml   | 56 +++++++++++++++++++
> >  1 file changed, 56 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/wireless/pci17cb,1103.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/net/wireless/pci17cb,1103.yaml b/Documentation/devicetree/bindings/net/wireless/pci17cb,1103.yaml
> > new file mode 100644
> > index 000000000000..df67013822c6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/wireless/pci17cb,1103.yaml
> 
> PCI devices are kind of exception in the naming, so this should be
> qcom,ath11k-pci.yaml or qcom,wcn6856.yaml (or something similar)

Heh, I suggested something similar in my reply to Kalle. Let's go with
'qcom,ath11k-pci.yaml' then as he first suggested (and keeping the
current schema file unchanged?).

> > @@ -0,0 +1,56 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +# Copyright (c) 2023 Linaro Limited
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/wireless/pci17cb,1103.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Technologies ath11k wireless devices (PCIe)
> > +
> > +maintainers:
> > +  - Kalle Valo <kvalo@xxxxxxxxxx>
> > +
> > +description: |
> > +  Qualcomm Technologies IEEE 802.11ax PCIe devices.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - pci17cb,1103  # WCN6856
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  qcom,ath11k-calibration-variant:
> 
> qcom,calibration-variant

This one is already in use as you noticed.

> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: calibration data variant
> 
> Your description copies the name of property. Instead say something more...

Yeah, I was actively avoiding trying to say too much (e.g. mentioning
the name of the current firmware file). See the definition in
qcom,ath11k.yaml.

I can try to find some middle ground unless you prefer copying the
current definition.

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux