From: Andrew Lunn <andrew@xxxxxxx>
The Marvell PHY can blink the LEDs, simple on/off. All LEDs blink at
the same rate, and the reset default is 84ms per blink, which is
around 12Hz.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
drivers/net/phy/marvell.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 5f4caca93983..c00f67f229f5 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -147,6 +147,8 @@
#define MII_88E1318S_PHY_LED_FUNC 0x10
#define MII_88E1318S_PHY_LED_FUNC_OFF (0x8)
#define MII_88E1318S_PHY_LED_FUNC_ON (0x9)
+#define MII_88E1318S_PHY_LED_FUNC_HI_Z (0xa)
+#define MII_88E1318S_PHY_LED_FUNC_BLINK (0xb)
#define MII_88E1318S_PHY_LED_TCR 0x12
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
@@ -2862,6 +2864,35 @@ static int m88e1318_led_brightness_set(struct phy_device *phydev,
MII_88E1318S_PHY_LED_FUNC, reg);
}
+static int m88e1318_led_blink_set(struct phy_device *phydev, u32 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ int reg;
+
+ reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE,
+ MII_88E1318S_PHY_LED_FUNC);
+ if (reg < 0)
+ return reg;
+
+ switch (index) {
+ case 0:
+ case 1:
+ case 2:
+ reg &= ~(0xf << (4 * index));
+ reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index);
+ /* Reset default is 84ms */
+ *delay_on = 84 / 2;
+ *delay_off = 84 / 2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return phy_write_paged(phydev, MII_MARVELL_LED_PAGE,
+ MII_88E1318S_PHY_LED_FUNC, reg);
+}
+
static int marvell_probe(struct phy_device *phydev)
{
struct marvell_priv *priv;
@@ -3112,6 +3143,7 @@ static struct phy_driver marvell_drivers[] = {
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
.led_brightness_set = m88e1318_led_brightness_set,
+ .led_blink_set = m88e1318_led_blink_set,
},
{
.phy_id = MARVELL_PHY_ID_88E1145,
@@ -3219,6 +3251,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
.led_brightness_set = m88e1318_led_brightness_set,
+ .led_blink_set = m88e1318_led_blink_set,
},
{
.phy_id = MARVELL_PHY_ID_88E1540,
@@ -3246,6 +3279,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
.led_brightness_set = m88e1318_led_brightness_set,
+ .led_blink_set = m88e1318_led_blink_set,
},
{
.phy_id = MARVELL_PHY_ID_88E1545,
@@ -3273,6 +3307,7 @@ static struct phy_driver marvell_drivers[] = {
.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
.led_brightness_set = m88e1318_led_brightness_set,
+ .led_blink_set = m88e1318_led_blink_set,
},
{
.phy_id = MARVELL_PHY_ID_88E3016,
@@ -3415,6 +3450,7 @@ static struct phy_driver marvell_drivers[] = {
.get_tunable = m88e1540_get_tunable,
.set_tunable = m88e1540_set_tunable,
.led_brightness_set = m88e1318_led_brightness_set,
+ .led_blink_set = m88e1318_led_blink_set,
},
};
--
2.39.2
