Type-C port management functionality lives inside of the PMIC block on
pm8150b.
The Type-C port management logic controls orientation detection, vbus/vconn
sense and to send/receive Type-C Power Domain messages.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 70 +++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 66752cc063d60..6db32bdbf5747 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -7,6 +7,8 @@
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/usb/typec/qcom,pmic-typec.h>
+#include <dt-bindings/usb/typec/qcom,pmic-pdphy.h>
/ {
thermal-zones {
@@ -37,6 +39,14 @@ trip2 {
};
};
};
+
+ tcpm: pm8150b-tcpm {
+ compatible = "qcom,pmic-virt-tcpm";
+ qcom,pmic-typec = <&pm8150b_typec>;
+ qcom,pmic-pdphy = <&pm8150b_pdphy>;
+
+ status = "disabled";
+ };
};
&spmi_bus {
@@ -59,6 +69,66 @@ pm8150b_vbus: usb-vbus-regulator@1100 {
reg = <0x1100>;
};
+ pm8150b_typec: typec@1500 {
+ compatible = "qcom,pm8150b-typec";
+ reg = <0x1500>;
+ interrupts = <0x2 0x15 PMIC_TYPEC_OR_RID_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_VPD_IRQ
+ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_CC_STATE_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_VCONN_OC_IRQ
+ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_VBUS_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_ATTACH_DETACH_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x15 PMIC_TYPEC_LEGACY_CABLE_IRQ
+ IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x15 PMIC_TYPEC_TRY_SNK_SRC_IRQ
+ IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "or-rid-detect-change",
+ "vpd-detect",
+ "cc-state-change",
+ "vconn-oc",
+ "vbus-change",
+ "attach-detach",
+ "legacy-cable-detect",
+ "try-snk-src-detect";
+ vdd-vbus-supply = <&pm8150b_vbus>;
+ };
+
+ pm8150b_pdphy: pdphy@1700 {
+ compatible = "qcom,pm8150b-pdphy";
+ reg = <0x1700>;
+ interrupts = <0x2 0x17 PMIC_PDPHY_SIG_TX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_SIG_RX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_TX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_RX_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_TX_FAIL_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_TX_DISCARD_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_MSG_RX_DISCARD_IRQ
+ IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x17 PMIC_PDPHY_FR_SWAP_IRQ
+ IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "sig-tx",
+ "sig-rx",
+ "msg-tx",
+ "msg-rx",
+ "msg-tx-failed",
+ "msg-tx-discarded",
+ "msg-rx-discarded",
+ "fr-swap";
+ vdd-phy-supply = <&vreg_l2a_3p1>;
+ };
+
pm8150b_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
--
2.39.2
