Signed-off-by: Hai Li <hali@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/drm/msm/dsi.txt | 97 +++++++++++++++++++++++
1 file changed, 97 insertions(+)
create mode 100644 Documentation/devicetree/bindings/drm/msm/dsi.txt
diff --git a/Documentation/devicetree/bindings/drm/msm/dsi.txt b/Documentation/devicetree/bindings/drm/msm/dsi.txt
new file mode 100644
index 0000000..b3cf325
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/msm/dsi.txt
@@ -0,0 +1,97 @@
+Qualcomm Technologies Inc. adreno/snapdragon DSI output
+
+Required properties:
+- compatible:
+ * "qcom,mdss-dsi-ctrl"
+- reg: Physical base address and length of the registers of controller, PLL,
+ PHY and PHY regulator
+- reg-names: The names of register regions. The following regions are required:
+ * "dsi_ctrl"
+ * "dsi_pll"
+ * "dsi_phy"
+ * "dsi_phy_regulator"
+- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should
+ be 0 or 1, since we have 2 DSI controllers at most for now.
+- interrupts: The interrupt signal from the DSI block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+ See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+ * "bus_clk"
+ * "byte_clk"
+ * "core_clk"
+ * "core_mmss_clk"
+ * "iface_clk"
+ * "mdp_core_clk"
+ * "pixel_clk"
+- #clock-cells: The value should be 1.
+- vdd-supply: phandle to vdd regulator device node
+- vddio-supply: phandle to vdd-io regulator device node
+- vdda-supply: phandle to vdda regulator device node
+
+Optional properties:
+- panel@0: Node of panel connected to this DSI controller.
+ See files in Documentation/devicetree/bindings/panel/ for each supported
+ panel.
+- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is
+ driving a panel which needs 2 DSI links.
+- qcom,master-panel: Boolean value indicating if the DSI controller is driving
+ the master link of the 2-DSI panel.
+- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is
+ driving a 2-DSI panel whose 2 links need receive command simultaneously.
+- interrupt-parent: phandle to the MDP block if the interrupt signal is routed
+ through MDP block
+
+Example:
+ mdss_dsi0: qcom,mdss_dsi@fd922800 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ qcom,dsi-host-index = <0>;
+ interrupt-parent = <&mdss_mdp>;
+ interrupts = <4 0>;
+ reg-names =
+ "dsi_ctrl",
+ "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator",
+ reg = <0xfd922800 0x200>,
+ <0xfd922a00 0xd4>,
+ <0xfd922b00 0x2b0>,
+ <0xfd922d80 0x7b>,
+ <0xfd828000 0x108>;
+ power-domains = <&mmcc MDSS_GDSC>;
+ clock-names =
+ "bus_clk",
+ "byte_clk",
+ "core_clk",
+ "core_mmss_clk",
+ "iface_clk",
+ "mdp_core_clk",
+ "pixel_clk";
+ clocks =
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>;
+ #clock-cells = <1>;
+ vdda-supply = <&pma8084_l2>;
+ vdd-supply = <&pma8084_l22>;
+ vddio-supply = <&pma8084_l12>;
+
+ qcom,dual-panel-mode;
+ qcom,master-panel;
+ qcom,sync-dual-panel;
+
+ panel: panel@0 {
+ compatible = "sharp,lq101r1sx01";
+ reg = <0>;
+ link2 = <&secondary>;
+
+ power-supply = <...>;
+ backlight = <...>;
+ };
+ };
+
+
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
