Re: [PATCH v8 1/2] leds: flash: add driver to support flash LED module in QCOM PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 03 Mar 2023, Fenglin Wu wrote:

> Add initial driver to support flash LED module found in Qualcomm
> Technologies, Inc. PMICs. The flash module can have 3 or 4 channels
> and each channel can be controlled indepedently and support full scale
> current up to 1.5 A. It also supports connecting two channels together
> to supply one LED component with full scale current up to 2 A. In that
> case, the current will be split on each channel symmetrically and the
> channels will be enabled and disabled at the same time.
>
> Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
> Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> # sm7225-fairphone-fp4 + pm6150l
> ---
>  drivers/leds/flash/Kconfig           |  15 +
>  drivers/leds/flash/Makefile          |   1 +
>  drivers/leds/flash/leds-qcom-flash.c | 773 +++++++++++++++++++++++++++
>  3 files changed, 789 insertions(+)
>  create mode 100644 drivers/leds/flash/leds-qcom-flash.c

Applied, thanks

--
Lee Jones [李琼斯]



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux