Re: [PATCH v2 1/1] PCI: qcom: Add support for system suspend and resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 02, 2023 at 02:06:25PM +0530, Manivannan Sadhasivam wrote:
> During the system suspend, vote for minimal interconnect bandwidth and
> also turn OFF the resources like clock and PHY if there are no active
> devices connected to the controller. For the controllers with active
> devices, the resources are kept ON as removing the resources will
> trigger access violation during the late end of suspend cycle as kernel
> tries to access the config space of PCIe devices to mask the MSIs.
> 
> Also, it is not desirable to put the link into L2/L3 state as that
> implies VDD supply will be removed and the devices may go into powerdown
> state. This will affect the lifetime of storage devices like NVMe.
> 
> And finally, during resume, turn ON the resources if the controller was
> truly suspended (resources OFF) and update the interconnect bandwidth
> based on PCIe Gen speed.
> 
> Suggested-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> Acked-by: Dhruva Gole <d-gole@xxxxxx>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 53 ++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index a232b04af048..7147f0103026 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -227,6 +227,7 @@ struct qcom_pcie {
>  	struct gpio_desc *reset;
>  	struct icc_path *icc_mem;
>  	const struct qcom_pcie_cfg *cfg;
> +	bool suspended;
>  };
>  
>  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
> @@ -1820,6 +1821,53 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> +static int qcom_pcie_suspend_noirq(struct device *dev)
> +{
> +	struct qcom_pcie *pcie = dev_get_drvdata(dev);
> +	int ret;
> +
> +	/* Set minimum bandwidth required to keep data path functional during suspend */
> +	ret = icc_set_bw(pcie->icc_mem, 0, MBps_to_icc(250));

I can again confirm that this now passes basic smoke testing on my CRD
(unlike v1 which set bw to 0) and X13s.

> +	if (ret) {
> +		dev_err(pcie->pci->dev, "Failed to set interconnect bandwidth: %d\n", ret);

You already have a pointer to dev.

> +		return ret;
> +	}

And please try to stay within 80 columns width unless breaking it
improves readability (generally does not apply comments).

> +
> +	/*
> +	 * Turn OFF the resources only for controllers without active PCIe devices. For controllers
> +	 * with active devices, the resources are kept ON and the link is expected to be in L0/L1
> +	 * (sub)states.
> +	 *
> +	 * Turning OFF the resources for controllers with active PCIe devices will trigger access
> +	 * violation during the end of the suspend cycle, as kernel tries to access the PCIe devices
> +	 * config space for masking MSIs.
> +	 *
> +	 * Also, it is not desirable to put the link into L2/L3 state as that implies VDD supply
> +	 * will be removed and the devices may go into powerdown state. This will affect the
> +	 * lifetime of the storage devices like NVMe.
> +	 */

Same here.

> +	if (!dw_pcie_link_up(pcie->pci)) {
> +		qcom_pcie_host_deinit(&pcie->pci->pp);
> +		pcie->suspended = true;
> +	}
> +
> +	return 0;
> +}
> +
> +static int qcom_pcie_resume_noirq(struct device *dev)
> +{
> +	struct qcom_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (pcie->suspended) {
> +		qcom_pcie_host_init(&pcie->pci->pp);

Looks like error handling is missing here.

> +		pcie->suspended = false;
> +	}
> +
> +	qcom_pcie_icc_update(pcie);
> +
> +	return 0;
> +}
> +
>  static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-apq8064", .data = &cfg_2_1_0 },
>  	{ .compatible = "qcom,pcie-apq8084", .data = &cfg_1_0_0 },
> @@ -1856,12 +1904,17 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
>  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
>  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
>  
> +static const struct dev_pm_ops qcom_pcie_pm_ops = {
> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(qcom_pcie_suspend_noirq, qcom_pcie_resume_noirq)
> +};
> +
>  static struct platform_driver qcom_pcie_driver = {
>  	.probe = qcom_pcie_probe,
>  	.driver = {
>  		.name = "qcom-pcie",
>  		.suppress_bind_attrs = true,
>  		.of_match_table = qcom_pcie_match,
> +		.pm = &qcom_pcie_pm_ops,
>  	},
>  };
>  builtin_platform_driver(qcom_pcie_driver);

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux