[PATCH RFT v2 09/14] clk: qcom: smd-rpm: Add support for keepalive votes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some bus clock should always have a minimum (19.2 MHz) vote cast on
them, otherwise the platform will fall apart, hang and reboot.

Add support for specifying which clocks should be kept alive and
always keep a vote on XO_A to make sure the clock tree doesn't
collapse. This removes the need to keep a maximum vote that was
previously guaranteed by clk_smd_rpm_handoff.

This commit is a combination of existing (not-exactly-upstream) work
by Taniya Das, Shawn Guo and myself.

Co-developed-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Co-developed-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/clk/qcom/clk-smd-rpm.c | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index eb7781e5c8c1..d89918f9ae60 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -45,15 +45,17 @@
 		},							      \
 	};								      \
 	__DEFINE_CLK_SMD_RPM_AO_PREFIX(_prefix, _name, _active, type,	      \
-				       r_id, key, ao_flags)
+				       r_id, key, ao_flags, false)
 
 #define __DEFINE_CLK_SMD_RPM_AO_PREFIX(_prefix, _name, _active,		      \
-				       type, r_id, key, ao_flags)	      \
+				       type, r_id, key, ao_flags,	      \
+				       _keep_alive)			      \
 	static struct clk_smd_rpm clk_smd_rpm_##_prefix##_active = {	      \
 		.rpm_res_type = (type),					      \
 		.rpm_clk_id = (r_id),					      \
 		.active_only = true,					      \
 		.rpm_key = (key),					      \
+		.keep_alive = (_keep_alive),				      \
 		.peer = &clk_smd_rpm_##_prefix##_name,			      \
 		.rate = INT_MAX,					      \
 		.hw.init = &(struct clk_init_data){			      \
@@ -170,6 +172,7 @@ struct clk_smd_rpm {
 	const bool active_only;
 	bool enabled;
 	bool branch;
+	bool keep_alive;
 	struct clk_smd_rpm *peer;
 	struct clk_hw hw;
 	unsigned long rate;
@@ -198,11 +201,16 @@ static int clk_smd_rpm_handoff(struct clk_smd_rpm *r)
 		.value = cpu_to_le32(r->branch ? 1 : INT_MAX),
 	};
 
+	/* Set up keepalive clocks with a minimum bus rate */
+	if (r->keep_alive)
+		req.value = cpu_to_le32(19200); /* 19.2 MHz */
+
 	ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
 				 r->rpm_res_type, r->rpm_clk_id, &req,
 				 sizeof(req));
 	if (ret)
 		return ret;
+
 	ret = qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
 				 r->rpm_res_type, r->rpm_clk_id, &req,
 				 sizeof(req));
@@ -438,12 +446,29 @@ static int clk_smd_rpm_is_enabled(struct clk_hw *hw)
 	return r->enabled;
 }
 
+static int clk_smd_rpm_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
+{
+	struct clk_smd_rpm *r = to_clk_smd_rpm(hw);
+
+	/*
+	 * RPM resolves the rates internally. All we have to do on the kernel
+	 * side is ensure that we don't accidentally put down the keepalive
+	 * clocks, which could happen if they received a vote below 19.2 MHz.
+	 */
+	if (r->keep_alive)
+		req->rate = max(req->rate, 19200000UL);
+
+	return 0;
+}
+
 static const struct clk_ops clk_smd_rpm_ops = {
 	.prepare	= clk_smd_rpm_prepare,
 	.unprepare	= clk_smd_rpm_unprepare,
 	.set_rate	= clk_smd_rpm_set_rate,
 	.round_rate	= clk_smd_rpm_round_rate,
 	.recalc_rate	= clk_smd_rpm_recalc_rate,
+	.determine_rate = clk_smd_rpm_determine_rate,
 	.is_enabled	= clk_smd_rpm_is_enabled,
 	.is_prepared	= clk_smd_rpm_is_enabled,
 };

-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux