On Wed, 8 Mar 2023 at 11:58, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>
> On 8.03.2023 11:40, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> >
> > Enable the SPI interface exposed on the sa8775p-ride development board.
> >
> > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> > index 5fdce8279537..d01ca3a9ee37 100644
> > --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> > +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> > @@ -14,6 +14,7 @@ / {
> > aliases {
> > serial0 = &uart10;
> > i2c18 = &i2c18;
> > + spi16 = &spi16;
> > };
> >
> > chosen {
> > @@ -40,12 +41,25 @@ &sleep_clk {
> > clock-frequency = <32764>;
> > };
> >
> > +&spi16 {
> > + pinctrl-0 = <&qup_spi16_default>;
> > + pinctrl-names = "default";
> > + status = "okay";
> > +};
> > +
> > &tlmm {
> > qup_uart10_default: qup-uart10-state {
> > pins = "gpio46", "gpio47";
> > function = "qup1_se3";
> > };
> >
> > + qup_spi16_default: qup-spi16-state {
> > + pins = "gpio86", "gpio87", "gpio88", "gpio89";
> Rather weird to have an identical configuration for all
> MOSI/MISO/CS/CLK pins.. Please doublecheck
>
This is in line with many other boards in arch/arm64/boot/dts/qcom/
that have the same config for all SPI pins. Some of them unnecessarily
split the config into separate state nodes with the same config
though.
Bart
> Konrad
> > + function = "qup2_se2";
> > + drive-strength = <6>;
> > + bias-disable;
> > + };
> > +
> > qup_i2c18_default: qup-i2c18-state {
> > pins = "gpio95", "gpio96";
> > function = "qup2_se4";
