Replaces (1 << x) with BIT(x) macro Signed-off-by: Pramod Gurav <gpramod@xxxxxxxxxxxxxx> --- This is a new patch added in this series. drivers/tty/serial/msm_serial.h | 58 ++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h index caf5363..f663822 100644 --- a/drivers/tty/serial/msm_serial.h +++ b/drivers/tty/serial/msm_serial.h @@ -21,11 +21,11 @@ #define UART_MR1_AUTO_RFR_LEVEL0 0x3F #define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 #define UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00 -#define UART_MR1_RX_RDY_CTL (1 << 7) -#define UART_MR1_CTS_CTL (1 << 6) +#define UART_MR1_RX_RDY_CTL BIT(7) +#define UART_MR1_CTS_CTL BIT(6) #define UART_MR2 0x0004 -#define UART_MR2_ERROR_MODE (1 << 6) +#define UART_MR2_ERROR_MODE BIT(6) #define UART_MR2_BITS_PER_CHAR 0x30 #define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) #define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) @@ -41,8 +41,8 @@ #define UART_CSR 0x0008 -#define UART_TF 0x000C -#define UARTDM_TF 0x0070 +#define UART_TF 0x000C +#define UARTDM_TF 0x0070 #define UART_CR 0x0010 #define UART_CR_CMD_NULL (0 << 4) @@ -62,29 +62,29 @@ #define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4) #define UART_CR_CMD_FORCE_STALE (4 << 8) #define UART_CR_CMD_RESET_TX_READY (3 << 8) -#define UART_CR_TX_DISABLE (1 << 3) -#define UART_CR_TX_ENABLE (1 << 2) -#define UART_CR_RX_DISABLE (1 << 1) -#define UART_CR_RX_ENABLE (1 << 0) +#define UART_CR_TX_DISABLE BIT(3) +#define UART_CR_TX_ENABLE BIT(2) +#define UART_CR_RX_DISABLE BIT(1) +#define UART_CR_RX_ENABLE BIT(0) #define UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4)) -#define UART_IMR 0x0014 -#define UART_IMR_TXLEV (1 << 0) -#define UART_IMR_RXSTALE (1 << 3) -#define UART_IMR_RXLEV (1 << 4) -#define UART_IMR_DELTA_CTS (1 << 5) -#define UART_IMR_CURRENT_CTS (1 << 6) -#define UART_IMR_RXBREAK_START (1 << 10) +#define UART_IMR 0x0014 +#define UART_IMR_TXLEV BIT(0) +#define UART_IMR_RXSTALE BIT(3) +#define UART_IMR_RXLEV BIT(4) +#define UART_IMR_DELTA_CTS BIT(5) +#define UART_IMR_CURRENT_CTS BIT(6) +#define UART_IMR_RXBREAK_START BIT(10) #define UART_IPR_RXSTALE_LAST 0x20 #define UART_IPR_STALE_LSB 0x1F #define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 #define UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80 -#define UART_IPR 0x0018 -#define UART_TFWR 0x001C -#define UART_RFWR 0x0020 -#define UART_HCR 0x0024 +#define UART_IPR 0x0018 +#define UART_TFWR 0x001C +#define UART_RFWR 0x0020 +#define UART_HCR 0x0024 #define UART_MREG 0x0028 #define UART_NREG 0x002C @@ -98,20 +98,20 @@ #define UART_TEST_CTRL 0x0050 #define UART_SR 0x0008 -#define UART_SR_HUNT_CHAR (1 << 7) -#define UART_SR_RX_BREAK (1 << 6) -#define UART_SR_PAR_FRAME_ERR (1 << 5) -#define UART_SR_OVERRUN (1 << 4) -#define UART_SR_TX_EMPTY (1 << 3) -#define UART_SR_TX_READY (1 << 2) -#define UART_SR_RX_FULL (1 << 1) -#define UART_SR_RX_READY (1 << 0) +#define UART_SR_HUNT_CHAR BIT(7) +#define UART_SR_RX_BREAK BIT(6) +#define UART_SR_PAR_FRAME_ERR BIT(5) +#define UART_SR_OVERRUN BIT(4) +#define UART_SR_TX_EMPTY BIT(3) +#define UART_SR_TX_READY BIT(2) +#define UART_SR_RX_FULL BIT(1) +#define UART_SR_RX_READY BIT(0) #define UART_RF 0x000C #define UARTDM_RF 0x0070 #define UART_MISR 0x0010 #define UART_ISR 0x0014 -#define UART_ISR_TX_READY (1 << 7) +#define UART_ISR_TX_READY BIT(7) #define UARTDM_RXFS 0x50 #define UARTDM_RXFS_BUF_SHIFT 0x7 -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
