Re: [PATCH 3/6] ARM: dts: qcom: sdx65: Add support for PCIe PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 3/6/2023 2:11 PM, Dmitry Baryshkov wrote:
On 06/03/2023 07:24, Rohit Agarwal wrote:
Add devicetree support for PCIe PHY used in SDX65 platform. This PHY is
used by the PCIe EP controller.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
  arch/arm/boot/dts/qcom-sdx65.dtsi | 32 ++++++++++++++++++++++++++++++++
  1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index b073e0c..246290d 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -292,6 +292,38 @@
              status = "disabled";
          };
  +        pcie0_phy: phy@1c07000 {
+            compatible = "qcom,sdx65-qmp-pcie-phy";
+            reg = <0x01c07000 0x1e4>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+            clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+                 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_0_CLKREF_EN>,
+                 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+            clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+            resets = <&gcc GCC_PCIE_PHY_BCR>;
+            reset-names = "phy";
+            assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+            assigned-clock-rates = <100000000>;
+            status = "disabled";
+
+            pcie0_lane: lanes@1c06000 {

Please use new style bindings found in qcom,sc8280xp-qmp-pcie-phy.yaml

Sure, Will update it the bindings and this.

Thanks,
Rohit.

+                reg = <0x01c06000 0xf0>, /* tx0 */
+                      <0x01c06200 0x2f0>, /* rx0 */
+                      <0x01c07200 0x1e8>, /* pcs */
+                      <0x01c06800 0xf0>, /* tx1 */
+                      <0x01c06a00 0x2f0>, /* rx1 */
+                      <0x01c07400 0xc00>; /* pcs_misc */
+                clocks = <&gcc GCC_PCIE_PIPE_CLK>;
+                clock-names = "pipe0";
+                #phy-cells = <0>;
+                clock-output-names = "pcie_pipe_clk";
+            };
+        };
+
          tcsr_mutex: hwlock@1f40000 {
              compatible = "qcom,tcsr-mutex";
              reg = <0x01f40000 0x40000>;




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux