Re: [PATCH 5/6] ARM: dts: qcom: sdx65-mtp: Enable PCIE0 PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6.03.2023 06:25, Rohit Agarwal wrote:
> Enable PCIE0 PHY on SDX65 MTP for PCIE EP.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> ---
Status should go last. It would be nice if you could update
that for the other nodes in this dt while at it.

Konrad
>  arch/arm/boot/dts/qcom-sdx65-mtp.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 85ea02d..86bb853 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -245,6 +245,13 @@
>  	status = "okay";
>  };
>  
> +&pcie0_phy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vreg_l1b_1p2>;
> +	vdda-pll-supply = <&vreg_l4b_0p88>;
> +};
> +
>  &qpic_bam {
>  	status = "okay";
>  };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux