[PATCH 10/11] arm64: dts: qcom: sc7280: fix EUD port properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nods with unit addresses must have also 'reg' property:

  sc7280-herobrine-crd.dtb: eud@88e0000: ports:port@0: 'reg' is a required property

Fixes: 0b059979090d ("arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index bdcb74925313..71179182c3b8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3593,12 +3593,17 @@ eud: eud@88e0000 {
 			      <0 0x088e2000 0 0x1000>;
 			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					eud_ep: endpoint {
 						remote-endpoint = <&usb2_role_switch>;
 					};
 				};
 				port@1 {
+					reg = <1>;
 					eud_con: endpoint {
 						remote-endpoint = <&con_eud>;
 					};
@@ -3609,7 +3614,11 @@ eud_con: endpoint {
 		eud_typec: connector {
 			compatible = "usb-c-connector";
 			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				port@0 {
+					reg = <0>;
 					con_eud: endpoint {
 						remote-endpoint = <&eud_con>;
 					};
-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux