Hi Kumar, Now that the rpm redesign dependency is resolved, If its not too late could you queue these dt patches for v4.1 or v4.1-rc1. I tested these patches on APQ8064 based IFC6410 board with SATA/USB/HDMI. I also rebased these patche on top of your qcom/dt branch. Thanks, srini Nicolas Dechesne (2): ARM: dts: apq8064: Add usb host support to CM QS-600 ARM: dts: apq8064: Add USB OTG support for CM QS-600 Pramod Gurav (1): ARM: dts: qcom: Add DT alias for serial port Rob Clark (1): ARM: dts: apq8064: Add MDP support Srinivas Kandagatla (6): ARM: dts: apq8064: add RPM regulators support ARM: dts: apq8064: Add usb host support. ARM: dts: apq8064: Add USB OTG support ARM: dts: apq8064: Add SATA controller support. ARM: dts: Move i2c1 pinctrl to apq8064.dtsi ARM: dts: apq8064 add i2c3 node for panel. arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 30 ++ arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 69 +++- arch/arm/boot/dts/qcom-apq8064.dtsi | 528 +++++++++++++++++++++++++++- 3 files changed, 618 insertions(+), 9 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
