Re: [PATCH v2 8/9] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 02, 2023 at 10:42:15AM +0100, Arnd Bergmann wrote:
> On Thu, Feb 2, 2023, at 10:16, Robert Marko wrote:
> > On Mon, 30 Jan 2023 at 18:11, Arnd Bergmann <arnd@xxxxxxxx> wrote:
> >> On Fri, Jan 13, 2023, at 17:44, Robert Marko wrote:
> >
> > As pointed out in the commit description, the ranges property was copied
> > from the QCA-s downstream 5.4 kernel [1] as I dont have any documentation
> > on the SoC.
> >
> > I have runtime tested this on Xiaomi AX3600 which has a QCA9889 card on the
> > Gen3 PCIe port, and on Xiaomi AX9000 which has QCA9889 on Gen2 port
> > and QCN9074 on the Gen3 port and they are working fine.
> 
> Neither of those use I/O ports though, nor does any other sensible
> device that was made in the past decade.
> 
> The compatible string tells me that this is a designware pcie block,
> so I think driver actually sets up the mapping based on the ranges
> property in DT in dw_pcie_iatu_detect() and dw_pcie_iatu_setup(),
> rather than the mapping being determined by hardware or firmware
> in advance.
> 
> Not sure about the general policy we have for this case, maybe the
> pci controller or pci-dwc maintainers have an idea here. I would
> think it's better to either have no I/O ranges in DT or have
> sensible ones than ones that are clearly bogus, if the controller
> is able to set up the ranges.
> 

Just happen to see this thread and I agree that the I/O port range is indeeed
bogus. This is due to the fact that no one tested I/O range with a compatible
device.

I'm not sure about the PCI policy though but we should fix the mapping across
all SoCs. I will send out a series for that.

Thanks for spotting, Arnd!

- Mani

>      Arnd

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux