Re: [PATCH v2 1/9] dt-bindings: arm: Add support for DSB element

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/02/2023 03:07, Tao Zhang wrote:
Hi Suzuki,

在 2/22/2023 2:11 AM, Suzuki K Poulose 写道:
On 19/01/2023 07:41, Tao Zhang wrote:
Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
Bit) element for TPDA. Specifies the DSB element size supported
by each monitor connected to the aggregator on each port. Should
be specified in pairs (port, dsb element size).

Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx>
Signed-off-by: Tao Zhang <taozha@xxxxxxxxxxxxxxxx>
---
  .../bindings/arm/qcom,coresight-tpda.yaml          | 22 ++++++++++++++++++++++
  1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index 2ec9b5b..298db7f 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -58,6 +58,26 @@ properties:
      minItems: 1
      maxItems: 2
  +  qcom,dsb-element-size:
+    description: |
+      Specifies the DSB(Discrete Single Bit) element size supported by
+      each monitor connected to the aggregator on each port. Should be
+      specified in pairs <port, dsb element size>.

Isn't this a property of the TPDM connected to the port ? i.e. the DSB size ? Thus shouldn't this be part of the TPDM device (and the TPDA will be able to find it from the TPDM device) ?

Since  the port number is about the input port of TPDA, this property needs to be configured in the TPDA-related settings.

That is because, you chose to describe the property of TPDM in TPDA ?
Instead if you do it as follows :

 tpdm {
       qcom,tpdm-dsb-elemenet-size = <32>
       out_ports {

	port {
             remote-endpoint=<&tpda_port_number>;
	}
 }

 tpda {
       in_ports {
           port {
                 remote-endpoint=<&tpdm0_port0>;
           }
       }
 }


The TPDA driver can figure out the "port" that a given TPDM is connected
to and thus find out the DSB size. For the tpda driver, pdata->conns
could hold the reference to the TPDM device and thus fetch the DSB size.
(Note: James is working on a patch to add input port connections to the
platform data).

Suzuki




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux