The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2: Linux 6.2-rc1 (2022-12-25 13:41:39 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-clk-for-6.3-2 for you to fetch changes up to c1855dd0a62b7ead360eb9231fb65c2108efaf47: clk: qcom: Revert sync_state based clk_disable_unused (2023-02-22 06:34:08 -0800) ---------------------------------------------------------------- Qualcomm clock driver updates for v6.3 Support for requesting the next power_off operation for a genpd to be synchronous is introduced, and implemented in the GDSC driver. To allow the GPU driver to request power_off to wait for the GDSC to actually collapse. Support for QDU1000/QRU1000 Global clock controller, SA8775P Global clock controller, SM8550 TCSR and display clock controller, SM6350 clock controller, nd MSM8996 CBF and APCS clock controllers is introduced.. Parent references are updated across a large number of clock drivers, to align with the design changes since those drivers where introduced. Similarly, test clocks has been dropped from a range of drivers. A range of fixes for the MSM8996 CPU clock controller is introduced. MSM8974 GCC is transitioned off the externally defined sleep_clk. GDSC in the global clock controller for QCS404 is added, and various parent definitions are cleaned up. The SDCC core clocks on SM6115 are moved for floor_ops. Programming of clk_dis_wait for GPU CX GDSC on SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct. The RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms. The SMD RPM driver receives a big cleanup, in particular a move away from duplicating declaration of identical clocks between multiple platforms. A few missing clocks across msm8998, msm8992, msm8916, qcs404 are added as well. Using devm_pm_runtime_enable() to clean up some duplication is done across SM8250 display and video clock controllers, SM8450 display clock controller and SC7280 LPASS clock controller. Devicetree binding changes for above mentioned additions and changes are introduced. Support for postponing clk_disable_unused() until sync_state was introduced, but later reverted again, awaiting an agreement on the solution. Lastly, a change to pad a few registers in the SM8250 DTS to 8 digits was picked up in the wrong tree and kept here, to avoid rebasing. ---------------------------------------------------------------- Abel Vesa (7): dt-bindings: clock: Add SM8550 TCSR CC clocks dt-bindings: clock: Add RPMHCC for SM8550 clk: qcom: rpmh: Add support for SM8550 rpmh clocks clk: qcom: Add TCSR clock driver for SM8550 clk: Add generic sync_state callback for disabling unused clocks clk: qcom: sdm845: Use generic clk_sync_state_disable_unused callback dt-bindings: clock: Add SM8550 TCSR CC clocks Akhil P Oommen (1): clk: qcom: gdsc: Support 'synced_poweroff' genpd flag Arnd Bergmann (2): clk: qcom: rpmh: remove duplicate IPA clock reference clk: qcom: gcc-qcs404: fix duplicate initializer warning Bartosz Golaszewski (5): dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p clk: qcom: rpmh: add clocks for sa8775p dt-bindings: clock: Add Qualcomm SA8775P GCC clk: qcom: gcc-sa8775p: remove unused variables dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property Bjorn Andersson (6): Merge tag '1672656511-1931-1-git-send-email-quic_akhilpo@xxxxxxxxxxx' into clk-for-6.3 Merge branch '20230104093450.3150578-2-abel.vesa@xxxxxxxxxx' into clk-for-6.3 clk: qcom: Remove need for clk_ignore_unused on sc8280xp Merge branch '20230103-topic-sm8550-upstream-dispcc-v3-1-8a03d348c572@xxxxxxxxxx' into clk-for-6.3 Merge branch '20230112204446.30236-2-quic_molvera@xxxxxxxxxxx' into HEAD clk: qcom: Revert sync_state based clk_disable_unused Bryan O'Donoghue (1): clk: qcom: smd-rpm: msm8936: Add PMIC gated RPM_SMD_XO_* Dmitry Baryshkov (100): dt-bindings: clock: qcom: gcc-qcs404: add two GDSC entries dt-bindings: clock: qcom: gcc-qcs404: switch to gcc.yaml dt-bindings: clock: qcom: gcc-qcs404: define clocks/clock-names for QCS404 clk: qcom: gcc-qcs404: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-qcs404: disable gpll[04]_out_aux parents clk: qcom: gcc-qcs404: fix names of the DSI clocks used as parents clk: qcom: gcc-qcs404: fix the name of the HDMI PLL clock clk: qcom: gcc-qcs404: get rid of the test clock clk: qcom: gcc-qcs404: move PLL clocks up clk: qcom: gcc-qcs404: use parent_hws/_data instead of parent_names clk: qcom: gcc-qcs404: sort out the cxo clock clk: qcom: gcc-qcs404: add support for GDSCs dt-bindings: clocks: qcom: rpmcc: add LN_BB_CLK_PIN clocks clk: qcom: smd-rpm: enable pin-controlled ln_bb_clk clocks on qcs404 clk: qcom: smd-rpm: remove duplication between MMXI and MMAXI defines clk: qcom: smd-rpm: remove duplication between qcs404 and qcm2290 clocks clk: qcom: smd-rpm: add missing ln_bb_clkN clocks clk: qcom: smd-rpm: use msm8998_ln_bb_clk2 for qcm2290 SoC clk: qcom: smd-rpm: rename msm8992_ln_bb_* clocks to qcs404_ln_bb_* clk: qcom: smd-rpm: remove duplication between sm6375 and sm6125 clocks clk: qcom: smd-rpm: add XO_BUFFER clock for each XO_BUFFER_PINCTRL clock clk: qcom: smd-rpm: drop the rpm_status_id field clk: qcom: smd-rpm: fix alignment of line breaking backslashes clk: qcom: smd-rpm: move clock definitions together clk: qcom: smd-rpm: rename some msm8974 active-only clocks clk: qcom: smd-rpm: simplify XO_BUFFER clocks definitions clk: qcom: smd-rpm: simplify SMD_RPM/_BRANCH/_QDSS clock definitions clk: qcom: smd-rpm: rename SMD_RPM_BRANCH clock symbols clk: qcom: smd-rpm: rename the qcm2290 rf_clk3 clocks clk: qcom: smd-rpm: rename SMD_RPM_BUS clocks clk: qcom: smd-rpm: remove usage of platform name clk: qcom: dispcc-sm8450: switch to parent_hws clk: qcom: dispcc-sc7180: switch to parent_hws clk: qcom: dispcc-sm6375: switch to parent_hws clk: qcom: camcc-sc7280: switch to parent_hws clk: qcom: camcc-sm8450: switch to parent_hws clk: qcom: gcc-msm8939: switch to parent_hws clk: qcom: gcc-msm8976: switch to parent_hws clk: qcom: gcc-sc7180: switch to parent_hws clk: qcom: gcc-sc7280: switch to parent_hws clk: qcom: gcc-sdx65: switch to parent_hws clk: qcom: gcc-sm6375: switch to parent_hws clk: qcom: gcc-sm8250: switch to parent_hws clk: qcom: gcc-sm8450: switch to parent_hws clk: qcom: gcc-sm8550: switch to parent_hws clk: qcom: gpucc-msm8998: switch to parent_hws clk: qcom: gpucc-sc7180: switch to parent_hws clk: qcom: lpasscc-sc7180: switch to parent_hws clk: qcom: dispcc-sm8250: switch to devm_pm_runtime_enable clk: qcom: dispcc-sm8450: switch to devm_pm_runtime_enable clk: qcom: lpasscc-sc7280: switch to devm_pm_runtime_enable clk: qcom: videocc-sm8250: switch to devm_pm_runtime_enable clk: qcom: dispcc-sm6115: use parent_hws for disp_cc_mdss_rot_clk clk: qcom: gcc-sm6375: use parent_hws for gcc_disp_gpll0_div_clk_src clk: qcom: clk-spmi-pmic-div: convert to use parent_data dt-bindings: clock: qcom,gcc-msm8998: drop core_bi_pll_test_se dt-bindings: clock: qcom,gcc-sdx55: drop core_bi_pll_test_se dt-bindings: clock: qcom,gcc-sdx65: drop core_bi_pll_test_se dt-bindings: clock: qcom,mmcc-msm8998: drop core_bi_pll_test_se dt-bindings: clock: qcom: gcc-sm8350: drop test clock dt-bindings: clock: qcom: gcc-sm8450: drop test clock clk: qcom: dispcc-qcm2290: get rid of test clock clk: qcom: gcc-msm8998: get rid of test clock clk: qcom: gcc-sc7180: get rid of test clock clk: qcom: gcc-sdx55: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-sdx55: get rid of test clock clk: qcom: mmcc-msm8998: get rid of test clock clk: qcom: gcc-msm8974: switch from sleep_clk_src to sleep_clk clk: qcom: rpmh: define IPA clocks where required dt-bindings: clock: qcom,gcc-apq8084: define clocks/clock-names dt-bindings: clock: qcom,gcc-apq8084: add GCC_MMSS_GPLL0_CLK_SRC dt-bindings: clock: qcom,mmcc: define clocks/clock-names for APQ8084 clk: qcom: gcc-apq8084: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-apq8084: move PLL clocks up clk: qcom: gcc-apq8084: use parent_hws/_data instead of parent_names clk: qcom: gcc-apq8084: add GCC_MMSS_GPLL0_CLK_SRC clk: qcom: mmcc-apq8084: use ARRAY_SIZE instead of specifying num_parents clk: qcom: mmcc-apq8084: move clock parent tables down clk: qcom: mmcc-apq8084: remove spdm clocks clk: qcom: mmcc-apq8084: use parent_hws/_data instead of parent_names dt-bindings: clock: qcom,msm8996-apcc: add sys_apcs_aux clock clk: qcom: clk-alpha-pll: program PLL_TEST/PLL_TEST_U if required clk: qcom: cpu-8996: correct PLL programming clk: qcom: cpu-8996: fix the init clock rate clk: qcom: cpu-8996: support using GPLL0 as SMUX input clk: qcom: cpu-8996: skip ACD init if the setup is valid clk: qcom: cpu-8996: simplify the cpu_clk_notifier_cb clk: qcom: cpu-8996: setup PLLs before registering clocks clk: qcom: cpu-8996: move qcom_cpu_clk_msm8996_acd_init call clk: qcom: cpu-8996: fix PLL configuration sequence clk: qcom: cpu-8996: fix ACD initialization clk: qcom: cpu-8996: fix PLL clock ops clk: qcom: cpu-8996: change setup sequence to follow vendor kernel clk: qcom: add the driver for the MSM8996 APCS clocks dt-bindings: clock: qcom,msm8996-cbf: Describe the MSM8996 CBF clock controller clk: qcom: add msm8996 Core Bus Framework (CBF) support clk: qcom: smd-rpm: provide RPM_SMD_XO_CLK_SRC on MSM8996 platform clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml Konrad Dybcio (5): clk: qcom: gcc-sm6115: Use floor_ops for SDCC1/2 core clk dt-bindings: clock: add QCOM SM6350 camera clock bindings clk: qcom: Add camera clock controller driver for SM6350 arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits clk: qcom: camcc-sm6350: Make camcc_sm6350_hws static Krzysztof Kozlowski (8): dt-bindings: clock: qcom,gcc-sc8280xp: document power domain dt-bindings: clock: qcom,spmi-clkdiv: convert to DT schema dt-bindings: clock: qcom,gcc-sm8350: drop core_bi_pll_test_se input clk: gcc-sm8150: drop PLL test clock clk: gcc-sm8350: drop PLL test clock dt-bindings: clock: qcom,videocc: correct clocks per variant dt-bindings: clock: qcom,camcc-sm8250: extend clocks and power domains clk: qcom: cpu-8996: add missing cputype include Marijn Suijten (1): clk: qcom: dispcc-sm6125: Fix compatible string to match bindings Melody Olvera (1): dt-bindings: clock: Add QDU1000 and QRU1000 GCC clocks Neil Armstrong (4): dt-bindings: clock: document SM8550 DISPCC clock controller clk: qcom: clk-alpha-pll: define alias of LUCID OLE reset ops to EVO reset ops clk: qcom: add SM8550 DISPCC driver dt-bindings: clock: document SM8550 DISPCC clock controller Robert Marko (1): clk: qcom: ipq8074: populate fw_name for usb3phy-s Shazad Hussain (1): clk: qcom: add the GCC driver for sa8775p Taniya Das (1): clk: qcom: Add QDU1000 and QRU1000 GCC support Ulf Hansson (1): PM: domains: Allow a genpd consumer to require a synced power off Yang Yingliang (1): clk: qcom: krait-cc: fix wrong pointer passed to IS_ERR() .../bindings/clock/qcom,camcc-sm8250.yaml | 20 +- .../bindings/clock/qcom,gcc-apq8084.yaml | 44 + .../bindings/clock/qcom,gcc-msm8998.yaml | 6 +- .../devicetree/bindings/clock/qcom,gcc-qcs404.yaml | 38 +- .../bindings/clock/qcom,gcc-sc8280xp.yaml | 7 + .../devicetree/bindings/clock/qcom,gcc-sdx55.yaml | 9 +- .../devicetree/bindings/clock/qcom,gcc-sdx65.yaml | 8 +- .../devicetree/bindings/clock/qcom,gcc-sm8350.yaml | 2 - .../bindings/clock/qcom,gpucc-sm8350.yaml | 71 - .../devicetree/bindings/clock/qcom,gpucc.yaml | 2 + .../devicetree/bindings/clock/qcom,mmcc.yaml | 46 +- .../bindings/clock/qcom,msm8996-apcc.yaml | 6 +- .../bindings/clock/qcom,msm8996-cbf.yaml | 53 + .../bindings/clock/qcom,qdu1000-gcc.yaml | 51 + .../devicetree/bindings/clock/qcom,rpmhcc.yaml | 2 + .../bindings/clock/qcom,sa8775p-gcc.yaml | 84 + .../bindings/clock/qcom,sm6350-camcc.yaml | 49 + .../bindings/clock/qcom,sm8550-dispcc.yaml | 105 + .../bindings/clock/qcom,sm8550-tcsr.yaml | 55 + .../devicetree/bindings/clock/qcom,spmi-clkdiv.txt | 59 - .../bindings/clock/qcom,spmi-clkdiv.yaml | 71 + .../devicetree/bindings/clock/qcom,videocc.yaml | 59 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 +- drivers/base/power/domain.c | 26 + drivers/clk/qcom/Kconfig | 40 + drivers/clk/qcom/Makefile | 7 +- drivers/clk/qcom/apcs-msm8996.c | 88 + drivers/clk/qcom/camcc-sc7280.c | 268 +- drivers/clk/qcom/camcc-sm6350.c | 1906 ++++++++ drivers/clk/qcom/camcc-sm8450.c | 324 +- drivers/clk/qcom/clk-alpha-pll.c | 5 + drivers/clk/qcom/clk-alpha-pll.h | 1 + drivers/clk/qcom/clk-cbf-8996.c | 315 ++ drivers/clk/qcom/clk-cpu-8996.c | 146 +- drivers/clk/qcom/clk-rpmh.c | 56 + drivers/clk/qcom/clk-smd-rpm.c | 1445 +++--- drivers/clk/qcom/clk-spmi-pmic-div.c | 10 +- drivers/clk/qcom/dispcc-qcm2290.c | 6 - drivers/clk/qcom/dispcc-sc7180.c | 8 +- drivers/clk/qcom/dispcc-sm6115.c | 4 +- drivers/clk/qcom/dispcc-sm6125.c | 2 +- drivers/clk/qcom/dispcc-sm6375.c | 4 +- drivers/clk/qcom/dispcc-sm8250.c | 9 +- drivers/clk/qcom/dispcc-sm8450.c | 221 +- drivers/clk/qcom/dispcc-sm8550.c | 1807 ++++++++ drivers/clk/qcom/gcc-apq8084.c | 1024 +++-- drivers/clk/qcom/gcc-ipq8074.c | 4 +- drivers/clk/qcom/gcc-msm8939.c | 32 +- drivers/clk/qcom/gcc-msm8974.c | 10 +- drivers/clk/qcom/gcc-msm8976.c | 30 +- drivers/clk/qcom/gcc-msm8998.c | 13 - drivers/clk/qcom/gcc-qcs404.c | 842 ++-- drivers/clk/qcom/gcc-qdu1000.c | 2653 +++++++++++ drivers/clk/qcom/gcc-sa8775p.c | 4785 ++++++++++++++++++++ drivers/clk/qcom/gcc-sc7180.c | 19 +- drivers/clk/qcom/gcc-sc7280.c | 10 +- drivers/clk/qcom/gcc-sdx55.c | 64 +- drivers/clk/qcom/gcc-sdx65.c | 109 +- drivers/clk/qcom/gcc-sm6115.c | 4 +- drivers/clk/qcom/gcc-sm6375.c | 257 +- drivers/clk/qcom/gcc-sm8150.c | 17 - drivers/clk/qcom/gcc-sm8250.c | 10 +- drivers/clk/qcom/gcc-sm8350.c | 15 - drivers/clk/qcom/gcc-sm8450.c | 236 +- drivers/clk/qcom/gcc-sm8550.c | 252 +- drivers/clk/qcom/gdsc.c | 11 +- drivers/clk/qcom/gpucc-msm8998.c | 8 +- drivers/clk/qcom/gpucc-sc7180.c | 11 +- drivers/clk/qcom/gpucc-sdm845.c | 7 +- drivers/clk/qcom/krait-cc.c | 4 +- drivers/clk/qcom/lpasscc-sc7280.c | 10 +- drivers/clk/qcom/lpasscorecc-sc7180.c | 20 +- drivers/clk/qcom/mmcc-apq8084.c | 1189 ++--- drivers/clk/qcom/mmcc-msm8998.c | 25 - drivers/clk/qcom/tcsrcc-sm8550.c | 192 + drivers/clk/qcom/videocc-sm8250.c | 9 +- include/dt-bindings/clock/qcom,gcc-apq8084.h | 1 + include/dt-bindings/clock/qcom,gcc-qcs404.h | 4 + include/dt-bindings/clock/qcom,gcc-sm8350.h | 1 - include/dt-bindings/clock/qcom,gcc-sm8450.h | 1 - include/dt-bindings/clock/qcom,qdu1000-gcc.h | 175 + include/dt-bindings/clock/qcom,rpmcc.h | 2 + include/dt-bindings/clock/qcom,sa8775p-gcc.h | 320 ++ include/dt-bindings/clock/qcom,sm6350-camcc.h | 109 + include/dt-bindings/clock/qcom,sm8550-dispcc.h | 101 + include/dt-bindings/clock/qcom,sm8550-tcsr.h | 18 + include/linux/pm_domain.h | 5 + include/linux/soc/qcom/smd-rpm.h | 1 - 88 files changed, 16475 insertions(+), 3688 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml delete mode 100644 Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt create mode 100644 Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml create mode 100644 drivers/clk/qcom/apcs-msm8996.c create mode 100644 drivers/clk/qcom/camcc-sm6350.c create mode 100644 drivers/clk/qcom/clk-cbf-8996.c create mode 100644 drivers/clk/qcom/dispcc-sm8550.c create mode 100644 drivers/clk/qcom/gcc-qdu1000.c create mode 100644 drivers/clk/qcom/gcc-sa8775p.c create mode 100644 drivers/clk/qcom/tcsrcc-sm8550.c create mode 100644 include/dt-bindings/clock/qcom,qdu1000-gcc.h create mode 100644 include/dt-bindings/clock/qcom,sa8775p-gcc.h create mode 100644 include/dt-bindings/clock/qcom,sm6350-camcc.h create mode 100644 include/dt-bindings/clock/qcom,sm8550-dispcc.h create mode 100644 include/dt-bindings/clock/qcom,sm8550-tcsr.h
