Use a define instead of hard-coded register values for Soundwire hardware version number, because it is a bit easier to read and allows to drop explaining comment. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- drivers/soundwire/qcom.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index ba502129150d..79bebcecde6d 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -28,6 +28,9 @@ #define SWRM_LINK_MANAGER_EE 0x018 #define SWRM_EE_CPU 1 #define SWRM_FRM_GEN_ENABLED BIT(0) +#define SWRM_VERSION_1_3_0 0x01030000 +#define SWRM_VERSION_1_5_1 0x01050001 +#define SWRM_VERSION_1_7_0 0x01070000 #define SWRM_COMP_HW_VERSION 0x00 #define SWRM_COMP_CFG_ADDR 0x04 #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK BIT(1) @@ -351,8 +354,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, /* Its assumed that write is okay as we do not get any status back */ swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val); - /* version 1.3 or less */ - if (swrm->version <= 0x01030000) + if (swrm->version <= SWRM_VERSION_1_3_0) usleep_range(150, 155); if (cmd_id == SWR_BROADCAST_CMD_ID) { @@ -695,7 +697,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK); ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); - if (ctrl->version >= 0x01070000) { + if (ctrl->version >= SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); @@ -704,8 +706,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) } /* Configure number of retries of a read/write cmd */ - if (ctrl->version >= 0x01050001) { - /* Only for versions >= 1.5.1 */ + if (ctrl->version >= SWRM_VERSION_1_5_1) { ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES | SWRM_CONTINUE_EXEC_ON_CMD_IGNORE); @@ -1239,7 +1240,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); if (ret) { - if (ctrl->version <= 0x01030000) + if (ctrl->version <= SWRM_VERSION_1_3_0) memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS); else return ret; @@ -1442,7 +1443,7 @@ static int qcom_swrm_probe(struct platform_device *pdev) pm_runtime_enable(dev); /* Clk stop is not supported on WSA Soundwire masters */ - if (ctrl->version <= 0x01030000) { + if (ctrl->version <= SWRM_VERSION_1_3_0) { ctrl->clock_stop_not_supported = true; } else { ctrl->reg_read(ctrl, SWRM_COMP_MASTER_ID, &val); @@ -1527,7 +1528,7 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) } else { reset_control_reset(ctrl->audio_cgcr); - if (ctrl->version >= 0x01070000) { + if (ctrl->version >= SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); -- 2.34.1