[PATCH 2/4] drm/msm/adreno: drop bogus pm_runtime_set_active()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The runtime PM status can only be updated while runtime PM is disabled.

Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.

Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/adreno/adreno_device.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c
index c5c4c93b3689..cd009d56d35d 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -438,9 +438,6 @@ struct msm_gpu *adreno_load_gpu(struct drm_device *dev)
 	 */
 	pm_runtime_enable(&pdev->dev);
 
-	/* Make sure pm runtime is active and reset any previous errors */
-	pm_runtime_set_active(&pdev->dev);
-
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0) {
 		pm_runtime_put_sync(&pdev->dev);
-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux