Re: [PATCH 6/7] clk: qcom: gcc-ipq9574: Add PCIe related clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/17/2023 2:13 PM, Sricharan Ramabadhran wrote:
Hi Devi,

On 2/14/2023 10:11 PM, Devi Priya wrote:
Add the clocks needed for enabling PCIe in IPQ9574

Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
---
  drivers/clk/qcom/gcc-ipq9574.c | 76 ++++++++++++++++++++++++++++++++++
  1 file changed, 76 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index b2a2d618a5ec..1bf33d582dc2 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -1538,6 +1538,24 @@ static struct clk_regmap_phy_mux pcie0_pipe_clk_src = {
      },
  };
+static struct clk_branch gcc_pcie0_pipe_clk = {
+    .halt_reg = 0x28044,
+    .halt_check = BRANCH_HALT_DELAY,
+    .clkr = {
+        .enable_reg = 0x28044,
+        .enable_mask = BIT(0),
+        .hw.init = &(struct clk_init_data){
+            .name = "gcc_pcie0_pipe_clk",
+            .parent_hws = (const struct clk_hw *[]) {
+                &pcie0_pipe_clk_src.clkr.hw
+            },
+            .num_parents = 1,
+            .flags = CLK_SET_RATE_PARENT,
+            .ops = &clk_branch2_ops,
+        },
+    },
+};
+

   Also, this patch should come before your phy driver updates.
Sure got it, will reorder the patches in V2

Regards,
  Sricharan

Best Regards,
Devi Priya



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux