[PATCH V5] clk: qcom: ipq5332: mark GPLL4 as ignore unused temporarily

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Clock framework disables the GPLL4 source since there are no active users
for this source currently. Some of the clocks initialized by the
bootloaders uses the GPLL4 as the source. Due to this, when the GPLL4 is
disabled by the clock framework, system is going for the reboot.

To avoid this, mark the GPLL4 as ignore unused so that clock framework
doesn't disable it. Once the users of this source is enabled, we can get
rid of this flag.

Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
---
Changes in V5:
	- Update the commit title to reflect CLK_IGNORE_UNUSED is used
	- This patch depends on the IPQ5332 baseport patches
	  https://lore.kernel.org/linux-arm-msm/20230217075835.460-1-quic_kathirav@xxxxxxxxxxx/

Changes in V4:
	- Updated the commit message and comment in driver that
	  CLK_IGNORE_UNUSED is used
	- This patch depends on the IPQ5332 baseport patches
	  https://lore.kernel.org/linux-arm-msm/20230217075835.460-1-quic_kathirav@xxxxxxxxxxx/

Changes in V3:
	- Fixed the typo in the comment
	- Used CLK_IGNORE_UNUSED instead of CLK_IS_CRITICAL

Changes in V2:
	- Added a comment in driver explaining the need of the flag

 drivers/clk/qcom/gcc-ipq5332.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq5332.c b/drivers/clk/qcom/gcc-ipq5332.c
index 9e4baea33937..bdb4a0a11d07 100644
--- a/drivers/clk/qcom/gcc-ipq5332.c
+++ b/drivers/clk/qcom/gcc-ipq5332.c
@@ -128,6 +128,17 @@ static struct clk_alpha_pll gpll4_main = {
 			.parent_data = &gcc_parent_data_xo,
 			.num_parents = 1,
 			.ops = &clk_alpha_pll_stromer_ops,
+			/*
+			 * There are no consumers for this GPLL in kernel yet,
+			 * (will be added soon), so the clock framework
+			 * disables this source. But some of the clocks
+			 * initialized by boot loaders uses this source. So we
+			 * need to keep this clock ON. Add the
+			 * CLK_IGNORE_UNUSED flag so the clock will not be
+			 * disabled. Once the consumer in kernel is added, we
+			 * can get rid of this flag.
+			 */
+			.flags = CLK_IGNORE_UNUSED,
 		},
 	},
 };
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux