Add RPM Glink, RPM message RAM and SMPA1 regulator
nodes to support frequency scaling on IPQ9574
Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
---
Changes in V2:
- Splitted the RPM and CPU Freq changes to individual patches
- Moved the regulators node to Board DT
- Dropped the regulator-always-on property
- Updated the compatible in regulators node with the existing
mp5496 compatible
arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 11 +++++++++++
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 17 +++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
index 21b53f34ce84..8a6caaeb0c4b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts
@@ -57,6 +57,17 @@
status = "okay";
};
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-mp5496-regulators";
+
+ ipq9574_s1: s1 {
+ regulator-min-microvolt = <587500>;
+ regulator-max-microvolt = <1075000>;
+ };
+ };
+};
+
&sdhc_1 {
pinctrl-0 = <&sdc_default_state>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index d20f3c7383f5..2f300cbab93e 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -133,6 +133,11 @@
#size-cells = <2>;
ranges;
+ rpm_msg_ram: rpm@60000 {
+ reg = <0x0 0x00060000 0x0 0x6000>;
+ no-map;
+ };
+
tz_region: tz@4a600000 {
reg = <0x0 0x4a600000 0x0 0x400000>;
no-map;
@@ -768,6 +773,18 @@
};
};
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: glink-channel {
+ compatible = "qcom,rpm-ipq9574";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
--
2.17.1
