Re: [PATCH v10 3/6] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 17.02.2023 14:47, Rob Herring wrote:
> 
> On Fri, 17 Feb 2023 12:08:26 +0100, Konrad Dybcio wrote:
>> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
>>
>> Add the bindings for the CPR3 driver to the documentation.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
>> [Konrad: Make binding check pass; update AGdR's email]
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml    | 299 +++++++++++++++++++++
>>  1 file changed, 299 insertions(+)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-1: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-2: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3: 'qcom,opp-cloop-vadj', 'qcom,opp-oloop-vadj' do not match any of the regexes: 'pinctrl-[0-9]+'
That's added in the previous patch

> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.example.dtb: opp-table-cprh: opp-3:qcom,opp-fuse-level:0: [2, 3] is too lonAnd that's fixed in

https://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git/commit/?h=opp/linux-next&id=68d8ad3bd9c397f2bf009368cb13e48cb91ea018

Konrad
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230217-topic-cpr3h-v10-3-67aed8fdfa61@xxxxxxxxxx
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux