[PATCH v5 02/10] interconnect: qcom: rpm: Add support for specifying channel num

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some nodes, like EBI0 (DDR) or L3/LLCC, may be connected over more than
one channel. This should be taken into account in bandwidth calcualtion,
as we're supposed to feed msmbus with the per-channel bandwidth. Add
support for specifying that and use it during bandwidth aggregation.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/interconnect/qcom/icc-rpm.c | 7 ++++++-
 drivers/interconnect/qcom/icc-rpm.h | 2 ++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index ffbeeca8c2b0..6bd20f62f8ed 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -317,6 +317,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
 {
 	struct icc_node *node;
 	struct qcom_icc_node *qn;
+	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
 	int i;
 
 	/* Initialise aggregate values */
@@ -334,7 +335,11 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
 	list_for_each_entry(node, &provider->nodes, node_list) {
 		qn = node->data;
 		for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
-			agg_avg[i] += qn->sum_avg[i];
+			if (qn->channels)
+				sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels);
+			else
+				sum_avg[i] = qn->sum_avg[i];
+			agg_avg[i] += sum_avg[i];
 			agg_peak[i] = max_t(u64, agg_peak[i], qn->max_peak[i]);
 		}
 	}
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index 8ba1918d7997..8aed5400afda 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -66,6 +66,7 @@ struct qcom_icc_qos {
  * @id: a unique node identifier
  * @links: an array of nodes where we can go next while traversing
  * @num_links: the total number of @links
+ * @channels: number of channels at this node (e.g. DDR channels)
  * @buswidth: width of the interconnect between a node and the bus (bytes)
  * @sum_avg: current sum aggregate value of all avg bw requests
  * @max_peak: current max aggregate value of all peak bw requests
@@ -78,6 +79,7 @@ struct qcom_icc_node {
 	u16 id;
 	const u16 *links;
 	u16 num_links;
+	u16 channels;
 	u16 buswidth;
 	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
 	u64 max_peak[QCOM_ICC_NUM_BUCKETS];

-- 
2.39.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux