On 14/02/2023 16:57, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add the serial port connected to the GNSS on sa8775p-ride.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 34 +++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 17 ++++++++++++
> 2 files changed, 51 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> index d01ca3a9ee37..9aee6e4c1ba1 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
> @@ -13,6 +13,7 @@ / {
>
> aliases {
> serial0 = &uart10;
> + serial1 = &uart17;
> i2c18 = &i2c18;
> spi16 = &spi16;
> };
> @@ -66,6 +67,30 @@ qup_i2c18_default: qup-i2c18-state {
> drive-strength = <2>;
> bias-pull-up;
> };
> +
> + qup_uart17_cts: qup-uart17-cts-state {
> + pins = "gpio91";
> + function = "qup2_se3";
> + bias-disable;
> + };
> +
> + qup_uart17_rts: qup0_uart17_rts-state {
No underscores in node names.
Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).
Best regards,
Krzysztof
