Re: [RFC PATCH v2 1/2] PM: domains: Skip disabling unused domains if provider has sync_state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 27 Jan 2023 at 11:40, Abel Vesa <abel.vesa@xxxxxxxxxx> wrote:
>
> Currently, there are cases when a domain needs to remain enabled until
> the consumer driver probes. Sometimes such consumer drivers may be built
> as modules. Since the genpd_power_off_unused is called too early for
> such consumer driver modules to get a chance to probe, the domain, since
> it is unused, will get disabled. On the other hand, the best time for
> an unused domain to be disabled is on the provider's sync_state
> callback. So, if the provider has registered a sync_state callback,
> assume the unused domains for that provider will be disabled on its
> sync_state callback. Also provide a generic sync_state callback which
> disables all the domains unused for the provider that registers it.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>
> This approach has been applied for unused clocks as well.
> With this patch merged in, all the providers that have sync_state
> callback registered will leave the domains enabled unless the provider's
> sync_state callback explicitly disables them. So those providers will
> need to add the disabling part to their sync_state callback. On the
> other hand, the platforms that have cases where domains need to remain
> enabled (even if unused) until the consumer driver probes, will be able,
> with this patch in, to run without the pd_ignore_unused kernel argument,
> which seems to be the case for most Qualcomm platforms, at this moment.

My apologies for the somewhat late reply. Please see my comments below.

>
> The v1 is here:
> https://lore.kernel.org/all/20230126234013.3638425-1-abel.vesa@xxxxxxxxxx/
>
> Changes since v1:
>  * added a generic sync state callback to be registered by providers in
>    order to disable the unused domains on their sync state. Also
>    mentioned this in the commit message.
>
>  drivers/base/power/domain.c | 17 ++++++++++++++++-
>  include/linux/pm_domain.h   |  3 +++
>  2 files changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> index 84662d338188..c2a5f77c01f3 100644
> --- a/drivers/base/power/domain.c
> +++ b/drivers/base/power/domain.c
> @@ -1099,7 +1099,8 @@ static int __init genpd_power_off_unused(void)
>         mutex_lock(&gpd_list_lock);
>
>         list_for_each_entry(genpd, &gpd_list, gpd_list_node)
> -               genpd_queue_power_off_work(genpd);
> +               if (!dev_has_sync_state(genpd->provider->dev))

Unfortunately, this doesn't really help, due to the fact that a
genpd's ->power_off() callback may get called anyway. At power off,
the genpd core only cares about those consumers that are currently
attached, not those that might get attached at some point later in
time.

In other words, it's the responsibility for each specific genpd
provider to cope with the condition that its ->sync_state() callback
may *not* have been called, while its ->power_off() callback is being
called.

In these cases, the genpd provider should probably make the
->power_off() callback to return -EBUSY. This is what we do in
psci_pd_power_off(), for example.

> +                       genpd_queue_power_off_work(genpd);
>
>         mutex_unlock(&gpd_list_lock);
>
> @@ -1107,6 +1108,20 @@ static int __init genpd_power_off_unused(void)
>  }
>  late_initcall(genpd_power_off_unused);
>
> +void genpd_power_off_unused_sync_state(struct device *dev)
> +{
> +       struct generic_pm_domain *genpd;
> +
> +       mutex_lock(&gpd_list_lock);
> +
> +       list_for_each_entry(genpd, &gpd_list, gpd_list_node)
> +               if (genpd->provider->dev == dev)
> +                       genpd_queue_power_off_work(genpd);
> +
> +       mutex_unlock(&gpd_list_lock);
> +}
> +EXPORT_SYMBOL_GPL(genpd_power_off_unused_sync_state);

I don't think this function is needed at all.

In fact, this part of the problem that you are trying to solve should
already be managed by the driver core, as it calls
dev->pm_domain->sync() (which is assigned to genpd_dev_pm_sync()) , in
really_probe(). Or isn't that taking care of the problem for you?

> +
>  #ifdef CONFIG_PM_SLEEP
>
>  /**
> diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
> index f776fb93eaa0..1fd5aa500c81 100644
> --- a/include/linux/pm_domain.h
> +++ b/include/linux/pm_domain.h
> @@ -351,6 +351,7 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev,
>                                          unsigned int index);
>  struct device *genpd_dev_pm_attach_by_name(struct device *dev,
>                                            const char *name);
> +void genpd_power_off_unused_sync_state(struct device *dev);
>  #else /* !CONFIG_PM_GENERIC_DOMAINS_OF */
>  static inline int of_genpd_add_provider_simple(struct device_node *np,
>                                         struct generic_pm_domain *genpd)
> @@ -419,6 +420,8 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np)
>  {
>         return ERR_PTR(-EOPNOTSUPP);
>  }
> +
> +static inline genpd_power_off_unused_sync_state(struct device *dev) {}
>  #endif /* CONFIG_PM_GENERIC_DOMAINS_OF */
>
>  #ifdef CONFIG_PM
> --
> 2.34.1
>

Kind regards
Uffe



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux