Re: [PATCH 0/3] arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/14/2023 9:27 PM, Bartosz Golaszewski wrote:
From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

This enables the QUPv3 interfaces that are exposed on the sa8775p-ride
board: I2C, SPI and the GNSS UART.

Bartosz Golaszewski (3):
   arm64: dts: qcom: sa8775p: add the i2c node for sa8775p-ride
   arm64: dts: qcom: sa8775p: add the SPI node for sa8775p-ride
   arm64: dts: qcom: sa8775p: add the GNSS high-speed UART for

Hi Bartosz,
This instance is for BT HS UART , not for GNSS.
For GNSS we have uart12 (0x00A94000).

-Shazad

     sa8775p-ride

  arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 67 +++++++++++++++++++++
  arch/arm64/boot/dts/qcom/sa8775p.dtsi     | 72 +++++++++++++++++++++++
  2 files changed, 139 insertions(+)




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux