Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 9910006c32aa..21b4f668889d 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -68,6 +68,7 @@ CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0>;
+ clocks = <&cpufreq_hw 0>;
enable-method = "psci";
next-level-cache = <&L2_0>;
power-domains = <&CPU_PD0>;
@@ -91,6 +92,7 @@ CPU1: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0x100>;
+ clocks = <&cpufreq_hw 0>;
enable-method = "psci";
next-level-cache = <&L2_100>;
power-domains = <&CPU_PD1>;
@@ -110,6 +112,7 @@ CPU2: cpu@200 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0x200>;
+ clocks = <&cpufreq_hw 0>;
enable-method = "psci";
next-level-cache = <&L2_200>;
power-domains = <&CPU_PD2>;
@@ -129,6 +132,7 @@ CPU3: cpu@300 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0x300>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_300>;
power-domains = <&CPU_PD3>;
@@ -148,6 +152,7 @@ CPU4: cpu@400 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0x400>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_400>;
power-domains = <&CPU_PD4>;
@@ -167,6 +172,7 @@ CPU5: cpu@500 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0x500>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_500>;
power-domains = <&CPU_PD5>;
@@ -186,6 +192,7 @@ CPU6: cpu@600 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0x600>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
next-level-cache = <&L2_600>;
power-domains = <&CPU_PD6>;
@@ -205,6 +212,7 @@ CPU7: cpu@700 {
device_type = "cpu";
compatible = "qcom,kryo";
reg = <0 0x700>;
+ clocks = <&cpufreq_hw 2>;
enable-method = "psci";
next-level-cache = <&L2_700>;
power-domains = <&CPU_PD7>;
@@ -3341,6 +3349,7 @@ cpufreq_hw: cpufreq@17d91000 {
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
#freq-domain-cells = <1>;
+ #clock-cells = <1>;
};
pmu@24091000 {
--
2.25.1
