[PATCH 1/2] arm64: dts: qcom: sc7180: Fix trogdor qspi pull direction

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Though it shouldn't matter very much, we've decided that it's slightly
better to park the qspi lines for trogdor with an internal pulldown
instead of an internal pullup. There was a footnote that Cr50 (which
connects to these lines too) may have pulldowns configured on one of
the data lines and we don't want to have fighting pulls. This also
means that if the pulls somehow get left powered in S3 (which I'm
uncertain about) that they won't be pulling up lines on an unpowered
SPI part.

Originally the pullup was picked because SPI transfers are active low
and thus the high state is somewhat more "idle", but that really isn't
that important because the chip select won't be asserted when the bus
is idle. The chip select has a nice external pullup on it that's
powered by the same power rail as the SPI flash.

This shouldn't have any functionality impact w/ reading/writing the
SPI since the lines are always push-pull when SPI transfers are
actually taking place.

Fixes: 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 423630c4d02c..de40abcd18db 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1054,7 +1054,7 @@ &qspi_clk {
 
 &qspi_data01 {
 	/* High-Z when no transfers; nice to park the lines */
-	bias-pull-up;
+	bias-pull-down;
 };
 
 &qup_i2c2_default {
-- 
2.39.1.581.gbfd45094c4-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux