From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
The SC8280XP CRD control over battery management and its two USB Type-C
port using pmic_glink and two GPIO-based SBU muxes.
Enable the two DisplayPort instances, GPIO SBU mux instance and
pmic_glink with the two connectors on the CRD.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
Changes since v3:
- Moved data-lanes into dp/port/endpoint
- Moved dp/port/endpoint definition to sc8280xp.dtsi, and reference by
label - to avoid repeating structure in the dts
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 196 +++++++++++++++++++++-
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 17 ++
2 files changed, 211 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 2179c06b4e3b..98a0f1f9f01e 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -36,6 +36,84 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ pmic-glink {
+ compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_con0_hs: endpoint {
+ remote-endpoint = <&usb_0_role_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_con0_ss: endpoint {
+ remote-endpoint = <&mdss0_dp0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_con0_sbu: endpoint {
+ remote-endpoint = <&usb0_sbu_mux>;
+ };
+ };
+ };
+ };
+
+ connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_con1_hs: endpoint {
+ remote-endpoint = <&usb_1_role_switch>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ pmic_glink_con1_ss: endpoint {
+ remote-endpoint = <&mdss0_dp1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_con1_sbu: endpoint {
+ remote-endpoint = <&usb1_sbu_mux>;
+ };
+ };
+ };
+ };
+ };
+
vreg_edp_3p3: regulator-edp-3p3 {
compatible = "regulator-fixed";
@@ -139,6 +217,46 @@ linux,cma {
linux,cma-default;
};
};
+
+ usb0-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_sbu_default>;
+
+ mode-switch;
+ orientation-switch;
+ svid = /bits/ 16 <0xff01>;
+
+ port {
+ usb0_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_con0_sbu>;
+ };
+ };
+ };
+
+ usb1-sbu-mux {
+ compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+ enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+ select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_sbu_default>;
+
+ mode-switch;
+ orientation-switch;
+ svid = /bits/ 16 <0xff01>;
+
+ port {
+ usb1_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_con1_sbu>;
+ };
+ };
+ };
};
&apps_rsc {
@@ -262,6 +380,24 @@ &mdss0 {
status = "okay";
};
+&mdss0_dp0 {
+ status = "okay";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&mdss0_dp1 {
+ status = "okay";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
&mdss0_dp3 {
compatible = "qcom,sc8280xp-edp";
/delete-property/ #sound-dai-cells;
@@ -480,7 +616,6 @@ &usb_0 {
};
&usb_0_dwc3 {
- /* TODO: Define USB-C connector properly */
dr_mode = "host";
};
@@ -499,12 +634,15 @@ &usb_0_qmpphy {
status = "okay";
};
+&usb_0_role_switch {
+ remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
- /* TODO: Define USB-C connector properly */
dr_mode = "host";
};
@@ -523,6 +661,10 @@ &usb_1_qmpphy {
status = "okay";
};
+&usb_1_role_switch {
+ remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
&xo_board_clk {
clock-frequency = <38400000>;
};
@@ -709,4 +851,54 @@ reset-n-pins {
drive-strength = <16>;
};
};
+
+ usb0_sbu_default: usb0-sbu-state {
+ oe-n-pins {
+ pins = "gpio101";
+ function = "gpio";
+ bias-disable;
+ drive-strengh = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio164";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ mode-pins {
+ pins = "gpio167";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ output-high;
+ };
+ };
+
+ usb1_sbu_default: usb1-sbu-state {
+ oe-n-pins {
+ pins = "gpio48";
+ function = "gpio";
+ bias-disable;
+ drive-strengh = <16>;
+ output-high;
+ };
+
+ sel-pins {
+ pins = "gpio47";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ mode-pins {
+ pins = "gpio50";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <16>;
+ output-high;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 92d5b5e21e50..0d02599d8867 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3040,6 +3040,11 @@ usb_0_dwc3: usb@a600000 {
iommus = <&apps_smmu 0x820 0x0>;
phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+
+ port {
+ usb_0_role_switch: endpoint {
+ };
+ };
};
};
@@ -3095,6 +3100,11 @@ usb_1_dwc3: usb@a800000 {
iommus = <&apps_smmu 0x860 0x0>;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+
+ port {
+ usb_1_role_switch: endpoint {
+ };
+ };
};
};
@@ -3253,6 +3263,7 @@ ports {
port@0 {
reg = <0>;
+
mdss0_dp0_in: endpoint {
remote-endpoint = <&mdss0_intf0_out>;
};
@@ -3260,6 +3271,9 @@ mdss0_dp0_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss0_dp0_out: endpoint {
+ };
};
};
@@ -3335,6 +3349,9 @@ mdss0_dp1_in: endpoint {
port@1 {
reg = <1>;
+
+ mdss0_dp1_out: endpoint {
+ };
};
};
--
2.25.1
