> Some of the PMIC's could have specific regmap configuration
> tables in future, so add specific compatible strings for known
> PMIC's. Also print runtime detected chip revision information.
>
> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> ---
>
> Changes since v2
>
> * Fixed error checks from regmap_reads's.
> * Reorganized pmic_spmi_id_table.
> * Lower device info print level.
>
> .../devicetree/bindings/mfd/qcom,spmi-pmic.txt | 19 +++-
> drivers/mfd/qcom-spmi-pmic.c | 103 +++++++++++++++++++--
> 2 files changed, 111 insertions(+), 11 deletions(-)
Applied with Stephen's Ack.
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> index 7182b88..6ac06c1 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> @@ -15,10 +15,21 @@ each. A function can consume one or more of these fixed-size register regions.
>
> Required properties:
> - compatible: Should contain one of:
> - "qcom,pm8941"
> - "qcom,pm8841"
> - "qcom,pma8084"
> - or generalized "qcom,spmi-pmic".
> + "qcom,pm8941",
> + "qcom,pm8841",
> + "qcom,pma8084",
> + "qcom,pm8019",
> + "qcom,pm8226",
> + "qcom,pm8110",
> + "qcom,pma8084",
> + "qcom,pmi8962",
> + "qcom,pmd9635",
> + "qcom,pm8994",
> + "qcom,pmi8994",
> + "qcom,pm8916",
> + "qcom,pm8004",
> + "qcom,pm8909",
> + or generalized "qcom,spmi-pmic".
> - reg: Specifies the SPMI USID slave address for this device.
> For more information see:
> Documentation/devicetree/bindings/spmi/spmi.txt
> diff --git a/drivers/mfd/qcom-spmi-pmic.c b/drivers/mfd/qcom-spmi-pmic.c
> index 4b8beb2..af6ac1c 100644
> --- a/drivers/mfd/qcom-spmi-pmic.c
> +++ b/drivers/mfd/qcom-spmi-pmic.c
> @@ -17,6 +17,100 @@
> #include <linux/regmap.h>
> #include <linux/of_platform.h>
>
> +#define PMIC_REV2 0x101
> +#define PMIC_REV3 0x102
> +#define PMIC_REV4 0x103
> +#define PMIC_TYPE 0x104
> +#define PMIC_SUBTYPE 0x105
> +
> +#define PMIC_TYPE_VALUE 0x51
> +
> +#define COMMON_SUBTYPE 0x00
> +#define PM8941_SUBTYPE 0x01
> +#define PM8841_SUBTYPE 0x02
> +#define PM8019_SUBTYPE 0x03
> +#define PM8226_SUBTYPE 0x04
> +#define PM8110_SUBTYPE 0x05
> +#define PMA8084_SUBTYPE 0x06
> +#define PMI8962_SUBTYPE 0x07
> +#define PMD9635_SUBTYPE 0x08
> +#define PM8994_SUBTYPE 0x09
> +#define PMI8994_SUBTYPE 0x0a
> +#define PM8916_SUBTYPE 0x0b
> +#define PM8004_SUBTYPE 0x0c
> +#define PM8909_SUBTYPE 0x0d
> +
> +static const struct of_device_id pmic_spmi_id_table[] = {
> + { .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
> + { .compatible = "qcom,pm8941", .data = (void *)PM8941_SUBTYPE },
> + { .compatible = "qcom,pm8841", .data = (void *)PM8841_SUBTYPE },
> + { .compatible = "qcom,pm8019", .data = (void *)PM8019_SUBTYPE },
> + { .compatible = "qcom,pm8226", .data = (void *)PM8226_SUBTYPE },
> + { .compatible = "qcom,pm8110", .data = (void *)PM8110_SUBTYPE },
> + { .compatible = "qcom,pma8084", .data = (void *)PMA8084_SUBTYPE },
> + { .compatible = "qcom,pmi8962", .data = (void *)PMI8962_SUBTYPE },
> + { .compatible = "qcom,pmd9635", .data = (void *)PMD9635_SUBTYPE },
> + { .compatible = "qcom,pm8994", .data = (void *)PM8994_SUBTYPE },
> + { .compatible = "qcom,pmi8994", .data = (void *)PMI8994_SUBTYPE },
> + { .compatible = "qcom,pm8916", .data = (void *)PM8916_SUBTYPE },
> + { .compatible = "qcom,pm8004", .data = (void *)PM8004_SUBTYPE },
> + { .compatible = "qcom,pm8909", .data = (void *)PM8909_SUBTYPE },
> + { }
> +};
> +
> +static void pmic_spmi_show_revid(struct regmap *map, struct device *dev)
> +{
> + unsigned int rev2, minor, major, type, subtype;
> + const char *name = "unknown";
> + int ret, i;
> +
> + ret = regmap_read(map, PMIC_TYPE, &type);
> + if (ret < 0)
> + return;
> +
> + if (type != PMIC_TYPE_VALUE)
> + return;
> +
> + ret = regmap_read(map, PMIC_SUBTYPE, &subtype);
> + if (ret < 0)
> + return;
> +
> + for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) {
> + if (subtype == (unsigned long)pmic_spmi_id_table[i].data)
> + break;
> + }
> +
> + if (i != ARRAY_SIZE(pmic_spmi_id_table))
> + name = pmic_spmi_id_table[i].compatible;
> +
> + ret = regmap_read(map, PMIC_REV2, &rev2);
> + if (ret < 0)
> + return;
> +
> + ret = regmap_read(map, PMIC_REV3, &minor);
> + if (ret < 0)
> + return;
> +
> + ret = regmap_read(map, PMIC_REV4, &major);
> + if (ret < 0)
> + return;
> +
> + /*
> + * In early versions of PM8941 and PM8226, the major revision number
> + * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0).
> + * Increment the major revision number here if the chip is an early
> + * version of PM8941 or PM8226.
> + */
> + if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) &&
> + major < 0x02)
> + major++;
> +
> + if (subtype == PM8110_SUBTYPE)
> + minor = rev2;
> +
> + dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor);
> +}
> +
> static const struct regmap_config spmi_regmap_config = {
> .reg_bits = 16,
> .val_bits = 8,
> @@ -33,6 +127,8 @@ static int pmic_spmi_probe(struct spmi_device *sdev)
> if (IS_ERR(regmap))
> return PTR_ERR(regmap);
>
> + pmic_spmi_show_revid(regmap, &sdev->dev);
> +
> return of_platform_populate(root, NULL, NULL, &sdev->dev);
> }
>
> @@ -41,13 +137,6 @@ static void pmic_spmi_remove(struct spmi_device *sdev)
> of_platform_depopulate(&sdev->dev);
> }
>
> -static const struct of_device_id pmic_spmi_id_table[] = {
> - { .compatible = "qcom,spmi-pmic" },
> - { .compatible = "qcom,pm8941" },
> - { .compatible = "qcom,pm8841" },
> - { .compatible = "qcom,pma8084" },
> - { }
> -};
> MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
>
> static struct spmi_driver pmic_spmi_driver = {
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
