Currently the dts contains a mix of status-as-first-property (old qcom
style) and status-as-last-property (new style).
Move all status properties down to the bottom once and for all so that
the style is consistent between different nodes.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 34 +++++++++++------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index f7602e93121a..86114dd2c0c4 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -110,8 +110,8 @@ active-config0 {
};
&adsp {
- status = "okay";
firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+ status = "okay";
};
&apps_rsc {
@@ -355,13 +355,13 @@ &cci1_i2c0 {
};
&cdsp {
- status = "okay";
firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+ status = "okay";
};
&i2c10 {
- status = "okay";
clock-frequency = <400000>;
+ status = "okay";
haptics@5a {
compatible = "awinic,aw8695";
@@ -396,8 +396,8 @@ &ipa {
};
&mpss {
- status = "okay";
firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+ status = "okay";
};
&pm6150l_flash {
@@ -423,11 +423,11 @@ led-1 {
};
&pm6150l_wled {
- status = "okay";
-
qcom,switching-freq = <800>;
qcom,current-limit-microamp = <20000>;
qcom,num-strings = <2>;
+
+ status = "okay";
};
&pm6350_gpios {
@@ -441,8 +441,8 @@ gpio_keys_pin: gpio-keys-state {
};
&pm6350_resin {
- status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
};
&pm7250b_adc {
@@ -535,21 +535,21 @@ &uart9 {
};
&ufs_mem_hc {
- status = "okay";
-
reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l7e>;
vcc-max-microamp = <800000>;
vccq2-supply = <&vreg_l12a>;
vccq2-max-microamp = <800000>;
+
+ status = "okay";
};
&ufs_mem_phy {
- status = "okay";
-
vdda-phy-supply = <&vreg_l18a>;
vdda-pll-supply = <&vreg_l22a>;
+
+ status = "okay";
};
&usb_1 {
@@ -562,26 +562,26 @@ &usb_1_dwc3 {
};
&usb_1_hsphy {
- status = "okay";
-
vdd-supply = <&vreg_l18a>;
vdda-pll-supply = <&vreg_l2a>;
vdda-phy-dpdm-supply = <&vreg_l3a>;
+
+ status = "okay";
};
&usb_1_qmpphy {
- status = "okay";
-
vdda-phy-supply = <&vreg_l22a>;
vdda-pll-supply = <&vreg_l16a>;
+
+ status = "okay";
};
&wifi {
- status = "okay";
-
vdd-0.8-cx-mx-supply = <&vreg_l4a>;
vdd-1.8-xo-supply = <&vreg_l7a>;
vdd-1.3-rfa-supply = <&vreg_l2e>;
vdd-3.3-ch0-supply = <&vreg_l10e>;
vdd-3.3-ch1-supply = <&vreg_l11e>;
+
+ status = "okay";
};
--
2.39.1
