On Wed, Feb 08, 2023 at 05:13:23PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>
> The SC8280XP CRD control over battery management and its two USB Type-C
> port using pmic_glink and two GPIO-based SBU muxes.
>
> Enable the two DisplayPort instances, GPIO SBU mux instance and
> pmic_glink with the two connectors on the CRD.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>
> Changes since v1:
> - Fixed style and property sort issues
> - Moved dwc3/port to sc8280xp.dtsi, override remote-endpoint here
> - Added pinconf properties to SBU control pins
>
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 200 +++++++++++++++++++++-
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 9 +
> 2 files changed, 207 insertions(+), 2 deletions(-)
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index fcd393444f47..0495361fc0fd 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3040,6 +3040,11 @@ usb_0_dwc3: usb@a600000 {
> iommus = <&apps_smmu 0x820 0x0>;
> phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
> phy-names = "usb2-phy", "usb3-phy";
> +
> + port {
> + usb_0_role_switch: endpoint {
> + };
> + };
> };
> };
>
> @@ -3095,6 +3100,10 @@ usb_1_dwc3: usb@a800000 {
> iommus = <&apps_smmu 0x860 0x0>;
> phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
> phy-names = "usb2-phy", "usb3-phy";
Nit: Add a newline before the child node here.
> + port {
> + usb_1_role_switch: endpoint {
> + };
> + };
> };
> };
Johan
