[PATCH v2] arm64: dts: qcom: sc7280: Adjust zombie PWM frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tune the PWM to solve screen flashing issue and high frequency noise.
While at it, the comment for the PWM settings incorrectly said we were using a 5kHz duty cycle. It should have said "period", not "duty cycle".
Correct this while updating the values.

Signed-off-by: Owen Yang <ecs.taipeikernel@xxxxxxxxx>
---

Changes in v2:
-Correct unit and update values in comment.

 arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
index 64deaaabac0f..a4fde22e3355 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
@@ -61,8 +61,8 @@ ap_tp_i2c: &i2c0 {
 };
 
 &pm8350c_pwm_backlight {
-	/* Set the PWM period to 200 microseconds (5kHz duty cycle) */
-	pwms = <&pm8350c_pwm 3 200000>;
+	/* Set the PWM period to 320 microseconds (3.125kHz frequency) */
+	pwms = <&pm8350c_pwm 3 320000>;
 };
 
 &pwmleds {
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux