Re: [PATCH v2 08/11] arm64: dts: qcom: sm8350-hdk: add pmic glink node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/02/2023 16:21, Konrad Dybcio wrote:


On 10.02.2023 16:02, Neil Armstrong wrote:
Add the pmic glink node linked with the DWC3 USB controller
switched to OTG mode and tagged with usb-role-switch.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 77 ++++++++++++++++++++++++++++-----
  1 file changed, 65 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 54654eb75c28..28fc9a835c5d 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -31,6 +31,40 @@ hdmi_con: endpoint {
  		};
  	};
+ pmic-glink {
+		compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+			};
+		};
+	};
+
  	vph_pwr: vph-pwr-regulator {
  		compatible = "regulator-fixed";
  		regulator-name = "vph_pwr";
@@ -666,23 +700,42 @@ &usb_1 {
  };
&usb_1_dwc3 {
-	/* TODO: Define USB-C connector properly */
-	dr_mode = "peripheral";
-};
+	dr_mode = "otg";
+	usb-role-switch;
-&usb_1_hsphy {
Are you removing the hsphy completely?

Oops seems I did remove too much stuff... thx for noticing


Konrad
-	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
- vdda-pll-supply = <&vreg_l5b_0p88>;
-	vdda18-supply = <&vreg_l1c_1p8>;
-	vdda33-supply = <&vreg_l2b_3p07>;
+		port@0 {
+			reg = <0>;
+
+			usb_1_dwc3_hs: endpoint {
+				remote-endpoint = <&pmic_glink_hs_in>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb_1_dwc3_ss: endpoint {
+				remote-endpoint = <&pmic_glink_ss_in>;
+			};
+		};
+	};
  };
-&usb_1_qmpphy {
-	status = "okay";
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
- vdda-phy-supply = <&vreg_l6b_1p2>;
-	vdda-pll-supply = <&vreg_l1b_0p88>;
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&pmic_glink_ss_in>;
  };
&usb_2 {





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux