Re: [PATCH 1/4] arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8.02.2023 04:46, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> Add the two DisplayPort controllers that are attached to QMP phys for
> providing display output on USB Type-C.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 170 ++++++++++++++++++++++++-
>  1 file changed, 166 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index dceb7eb3106b..fcd393444f47 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3155,6 +3155,20 @@ ports {
>  					#address-cells = <1>;
>  					#size-cells = <0>;
>  
> +					port@0 {
> +						reg = <0>;
Generally, there should be a newline between properties and child
nodes.

> +						mdss0_intf0_out: endpoint {
> +							remote-endpoint = <&mdss0_dp0_in>;
> +						};
> +					};
> +
> +					port@4 {
> +						reg = <4>;
> +						mdss0_intf4_out: endpoint {
> +							remote-endpoint = <&mdss0_dp1_in>;
> +						};
> +					};
> +
>  					port@5 {
>  						reg = <5>;
>  						mdss0_intf5_out: endpoint {
> @@ -3199,6 +3213,154 @@ opp-600000000 {
>  				};
>  			};
>  
> +			mdss0_dp0: displayport-controller@ae90000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0xae90000 0 0x200>,
> +				      <0 0xae90200 0 0x200>,
> +				      <0 0xae90400 0 0x600>,
> +				      <0 0xae91000 0 0x400>,
> +				      <0 0xae91400 0 0x400>;
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <12>;
> +				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
I overlooked this previously, but please turn this into a vertical list.

With these fixed:

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad

> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
> +						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
> +
> +				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss0_dp0_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_CX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss0_dp0_in: endpoint {
> +							remote-endpoint = <&mdss0_intf0_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss0_dp0_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss0_dp1: displayport-controller@ae98000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0xae98000 0 0x200>,
> +				      <0 0xae98200 0 0x200>,
> +				      <0 0xae98400 0 0x600>,
> +				      <0 0xae99000 0 0x400>,
> +				      <0 0xae99400 0 0x400>;
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <13>;
> +				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
> +						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
> +
> +				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss0_dp1_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_CX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss0_dp1_in: endpoint {
> +							remote-endpoint = <&mdss0_intf4_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss0_dp1_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
>  			mdss0_dp2: displayport-controller@ae9a000 {
>  				compatible = "qcom,sc8280xp-dp";
>  				reg = <0 0xae9a000 0 0x200>,
> @@ -3387,10 +3549,10 @@ dispcc0: clock-controller@af00000 {
>  			clocks = <&gcc GCC_DISP_AHB_CLK>,
>  				 <&rpmhcc RPMH_CXO_CLK>,
>  				 <&sleep_clk>,
> -				 <0>,
> -				 <0>,
> -				 <0>,
> -				 <0>,
> +				 <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +				 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
> +				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
> +				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
>  				 <&mdss0_dp2_phy 0>,
>  				 <&mdss0_dp2_phy 1>,
>  				 <&mdss0_dp3_phy 0>,



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux