On Tue, Mar 24, 2015 at 10:30:19PM +0000, Srinivas Kandagatla wrote:
> This patch adds just consumers part of the framework just to enable easy
> review.
>
> Up until now, EEPROM drivers were stored in drivers/misc, where they all had to
> duplicate pretty much the same code to register a sysfs file, allow in-kernel
> users to access the content of the devices they were driving, etc.
>
> This was also a problem as far as other in-kernel users were involved, since
> the solutions used were pretty much different from on driver to another, there
> was a rather big abstraction leak.
>
> This introduction of this framework aims at solving this. It also introduces DT
> representation for consumer devices to go get the data they require (MAC
> Addresses, SoC/Revision ID, part numbers, and so on) from the EEPROMs.
>
> Having regmap interface to this framework would give much better
> abstraction for eeproms on different buses.
Thanks for working on this. This is something that is missing in the
kernel, it looks very promising to me.
Some comments inline
> +static struct eeprom_cell *__eeprom_cell_get(struct device_node *cell_np,
> + const char *ename,
> + struct eeprom_block *blocks,
> + int nblocks)
> +{
> + struct eeprom_cell *cell;
> + struct eeprom_device *eeprom = NULL;
No need to initialize.
> + struct property *prop;
> + const __be32 *vp;
> + u32 pv;
> + int i, rval;
> +
> + mutex_lock(&eeprom_mutex);
> +
> + eeprom = cell_np ? of_eeprom_find(cell_np->parent) : eeprom_find(ename);
> + if (!eeprom) {
> + mutex_unlock(&eeprom_mutex);
> + return ERR_PTR(-EPROBE_DEFER);
> + }
> +
> +/**
> + * of_eeprom_cell_get(): Get eeprom cell of device form a given index
> + *
> + * @dev: Device that will be interacted with
> + * @index: eeprom index in eeproms property.
> + *
> + * The return value will be an ERR_PTR() on error or a valid pointer
> + * to a struct eeprom_cell. The eeprom_cell will be freed by the
> + * eeprom_cell_put().
> + */
> +struct eeprom_cell *of_eeprom_cell_get(struct device *dev, int index)
> +{
I think the consumer API could be improved. The dev pointer is only used
to get the struct device_node out of it, so the device_node could be
passed in directly. As written in my other mail I think the binding
would be better like "calibration = <&tsens_calibration>;", so this
function could be:
of_eeprom_cell_get(struct device_node *np, const char *name)
With this we could also get eeprom cells from subnodes which do not have
a struct device bound to them.
> + struct device_node *cell_np;
> +
> + if (!dev || !dev->of_node)
> + return ERR_PTR(-EINVAL);
> +
> + cell_np = of_parse_phandle(dev->of_node, "eeproms", index);
> + if (!cell_np)
> + return ERR_PTR(-EPROBE_DEFER);
-EPROBE_DEFER is not appropriate here. If of_parse_phandle fails it
won't work next time.
> +
> + return __eeprom_cell_get(cell_np, NULL, NULL, 0);
> +}
> +EXPORT_SYMBOL_GPL(of_eeprom_cell_get);
> +
> +/**
> + * eeprom_cell_write(): Write to a given eeprom cell
> + *
> + * @cell: eeprom cell to be written.
> + * @buf: Buffer to be written.
> + * @len: length of buffer to be written to eeprom cell.
> + *
> + * The return value will be an non zero on error or a zero on successful write.
No, it returns the length.
> + */
> +int eeprom_cell_write(struct eeprom_cell *cell, const char *buf, ssize_t len)
> +{
> + struct eeprom_device *eeprom = cell->eeprom;
> + int i, rc, offset = 0;
> +
> + if (!eeprom || !eeprom->regmap || len != cell->size)
> + return -EINVAL;
> +
> + for (i = 0; i < cell->nblocks; i++) {
> + rc = regmap_bulk_write(eeprom->regmap, cell->blocks[i].offset,
> + buf + offset,
> + cell->blocks[i].count);
> +
> + if (IS_ERR_VALUE(rc))
> + return rc;
> +
> + offset += cell->blocks[i].count;
> + }
> +
> + return len;
> +}
> +EXPORT_SYMBOL_GPL(eeprom_cell_write);
> +
> +static inline char *eeprom_cell_read(struct eeprom_cell *cell, ssize_t *len)
> +{
> + return NULL;
> +}
The documentation above the real function states that this function
either returns an ERR_PTR() or a valid pointer. The wrapper should then
do the same.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
